Product Details

Specifications

Tube centrifuge separator can do solid-liquid separation, liquid-liquid separation or liquid-liquid-solid separation.

With the transformation of structure of high-speed drive part, intake bearing block and heat treatment process of drum, as well as the material of some wear parts, our tube separator is the new generation upgrade product with the highest rotating speed.

Tubular/tube centrifugal separator

Summary:

Tube centrifugal separator (also can be named tube centrifuge) is a high speed high separation factor and high separation accuracy machine. It features small land area, easy of operation, maintenance and cleaning, low energy consumption and environmental protection. It is the kind of purely Physical Separate Machine.

It is suitable for separating turbid liquid or emulsion of very narrow difference in specific gravity or fine granule. It is widely used in petroleum, chemical, pharmacy, biological and food industries, etc.

The structure of this centrifuge is drive part, tray part, machine body, drum part and liquid inlet bearing block part.

The separation principle: materials are injected into drum part from bottom liquid inlet; then because of the high-speed rotating of drum, the materials will be separated according to different specific gravity; the clarified liquid will be discharged from the top outlet of drum, while the solids stay in the drum and can be cleaned away by professional tool after its stop. So that to achieve solid-liquid separation, liquid-liquid separation or liquid-liquid-solid separation.

Different types:

(1) “TS”-Separation type (double or triple phase separation)

TS series tube centrifugal separator is mainly used to separate two kinds of immiscible liquids or with few impurities. Under no emulsification, it can do the liquid-liquid separation or liquid-liquid-solid separation.

For example,

oil water separation, blood separation (to separate the blood corpuscle from plasma in blood ), solvent separation, etc.

(2) “TC”-Clarification type (only double phase separation)

TC series tube centrifugal separator is mainly used to separate various suspension liquids with lower solid content; especially for suspension solid-liquid separation which is of low concentration, fine granule, very narrow difference in solid-liquid specific gravity.

For example,

extraction of bacteria (colibacillus, lactobacillus or Lactobacillus Bulgaricus, etc), extraction of proteins, separation of fermentation liquor, separation of nanometer materials, slag removal of drink, purification of coffee or liquid medicine, etc.

Flow diagram:

and

Technical parameter of “TS” and “TC” Series:

Model		TS/TC-75	TS/TC-105	TS/TC-125	TS/TC-150
Drum	Inner diameter (mm)	75	105	125	142
	Effective height (mm)	450	730	730	738
	Volume (L)	2.2	6	8	11
	Rotating speed (r/min)	19000	18000	15000	15000
	Max. separation factor	15100	19050	15700	18000
Dia. of liquid inlet (mm)		3,5,7	4,6,8	5,7,9	6,8,10
Pressure of liquid inlet		>0.05MPa
Production capacity (L/h) (based on water only)		~670	~1700	~1500	~3200
Motor (kw)		1.5	3.0	3.0	3.0
Outline dimension (LWH) (mm)		500×700×1300	630×900×1600	630×900×1660	630×900×1600
Weight (Kg)		200	480	500	510

Note: The prodcution capacity is based on water only, just for reference. Different feeding solution will of different production capacity.

PAY ATTENTION THAT:

Compared with similar products, the rotating speed of our machine is the real highest speed can be achieved at present. The higher rotating speed, the better separation effect.

PLEASE INDENTIFY THE ROTATING SPEED WHEN YOU CHOOSE MACHINE.