Introduction of Rotary Kiln Incinerator :

Rotary Kiln refers to rotating calcination kiln, belongs to construction material equipment. According to different materials, rotary kiln can be divided into cement kiln, metallurgy chemical kiln and lime kiln. The cement kiln is used for making cement clinker and there are dry and wet methods to make cement. Metallurgy chemical kiln is applied in metallurgy industries and ironworks for lean iron ore, chromium ore and ferronickel ore calcination. Lime kiln is mainly used for calcine dolomite and active lime which is used in steel plant and ferroalloy factory.

Working Principle of Rotary Kiln Incinerator :

1. With a certain slope to the level, the whole kiln body is supported by rollers and fitted with thrust rollers to control up and down movement of the kiln body.
2. Besides main driving unit for driving system, it is also fitted with the auxiliary driving unit so as to ensure the kiln body still can rotating when the main motor is powered off and prevent it from deforming.
3. The kiln head adopts housing type sealing and kiln rear uses axial contact sealing unit so that reliability of sealing could be ensured.

Structure of Rotary Kiln Incinerator :

(1)Kiln outlet part Kiln outlet is the discharging part of rotary kiln, and its diameter is greater than the diameter of rotary kiln, and the seal is achieved by stainless steel scales and kiln body, the main component of the access port, coal injection nozzle, car, observation hole, etc. The main components have the access port, coal injection nozzle, car, observation hole, etc.
(2)Kiln body part It is the main part of the rotary kiln, usually 30 to 150 meters long, with cylindrical shape and 3-5 rolling ring in the middle. Cylinder is general by factory processed into 3 ~ 10 section, after by a large truck transporting to the destination, welded together. The roll ring part is also commonly composed of steel casting, and the steel plate the part of kiln body near rolling ring due to bearing it is thicker than any other part of the kiln body. Support tug, is also part of the kiln body, in correspondence with a hoop and connected to the foundation, and is the weight-bearing pillars of the rotary kiln. A set of roller, is usually composed of two rollers and two catch wheels. In normal operation of rotary kiln, it needs to put a brick on the inside.
(3)Kiln inlet part Kiln inlet is also an important part of the rotary kiln, and the shape of the feed end is similar to a lid of rotary kiln, which is mainly responsible for feeding and sealing.

Applicant of Rotary Kiln Incinerator :

Rotary kiln is a pyroprocessing device used to raise materials to a high temperature (calcination) in a continuous process. Materials produced using rotary kilns include: Cement, Lime,Refractories,Metakaolin,Titanium dioxide,Alumina,Vermiculite, Iron ore pellets.They are also used for roasting a wide variety of sulfide ores prior to metal extraction.

Mian technical parameters

Standard export packing, Spare parts in wooden case, big machines loaded in container, large machines use nude packing, cover with plastic cloth. We export through Qingdao Port, also can be nominated by customer. We have superior cargo agent to arrange the sea shipment for each client, competitive price, secure transportation.

Pre-sale services

1. Select proper equipment model;
2. Design and manufacture products according to clients' special requirement;
3. Arrange for visiting our factory, assist them to handle relative procedure, such as vis.

Services during the sale
1. Make sure goods prepared within delivery time;
2. Pre-check and accept products ahead of delivery;
3. Prepare documents required to help customer pass customs clearance.
4. Help clients to make Project evaluation and feasibility analysis and draft solving plans.

After-sale services
1. Assist clients to prepare for the first construction scheme;
2. Install, debug and examine the equipment;
3. Train technical personnel the first-line operators;
4. Provide technical exchanging
5. Offer spare parts at a best price for long term.

Are you manufacturer?

Yes, the zhongke machinery is a company of industry and trade integration, we have more than 20 years experience about production mining equipment.

Do you accept customization?

Yes, we have a professional engineer, to recommend and design for the customer's needs.

Will you assist in the installation?

Yes, if you need, we have professional technicians to help you install the equipment.

Please contact us for more questions.

Henan Zhongke Engineering & Technology Co., Ltd. is specialized in heavy equipment like various crusher, stone jaw crusher, magnetic separators, mining machines, bricks and blocks machines, cement production line. AAC block line, etc. And it is located in the middle of China. Our competitive price, high quality products and excellent aftersales service had gain us good reputation in this field.

Qualification & Honour

Scenes of workshop

International Cooperation

Welcome to visit our company and factory!