Item No.

ASN-36W-1

Name

36W Nail UV Lamp with removable bottom reflector tray

Power

36 Watt

Timer

90-120 Seconds 

Product Size

28.5X23X13.5 Cm

Packing

56X50X25 Cm/8 Pcs

Wavelength

370nm

Voltage

100V-120V 50-60 Hz or 220V-240V 50-60 Hz

Use 4X9W UV bulbs. Please replace the bulbs regularly for proper curing.

(The wavelength is visible light, however, it is not recommended that you or your client stare at the bulbs for any length of time.)

Instruction:
This lamp is for curing finger nails.
1. Plug the lamp in and press the O/I switch on the black of the lamp to the “I” position.
2. Place your hand into the machine and select the appropriate timer setting with I/II switch on the top of the machine.
3. Press the Red “timer start” button on the top of the machine.
4. Lamp will shut off automatically when the time is reached.

Important: 
1. UV bulbs should be replaced regularly every 4-6 months depending on how frequently you use the lamp.
2. Never stare at the bulbs.
3. For best efficiency, never run the lamp when not in use.

Maintenance: 
1. If a bulb isn’t working properly, firstly check that it is plugged in tightly.
2. If there is a problem with your UV lamp, we recommend that you take it to a professional, household electrician. Never attempt to open the lamp housing by yourself.
3. If you should damage the power cord, please refer to a professional, household electrician to replace the cord in order to avoid a hazard.

Warning: Keep Away from Children.