BMTE /Eaton 4000 series 109-xxx-xxx /110-xxx-xxx/111-xxx-xxx high pressure orbit hydrualic motor
USD $130 - $200 /Piece
Min.Order:10 Pieces
Danyang Titan Power Fluid Component Co., Ltd.
Z3SYFH500 low speed hydraulic motor-brakes replace M+S hydraulics TW500B350*V
101S-5T series hydraulic steering control units which replace danfoss steering unit
101S-1 Series open center non-reaction with integral valve hydraulic steering control units
BZZ1 series power steering control unit with big displacement
BMTE /Eaton 4000 series 109-xxx-xxx /110-xxx-xxx/111-xxx-xxx high pressure orbit hydrualic motor
The disc valve Geroler technology, which has rollers incorporated into the internal fixed gear ring, allows for higher flows and higher pressures than the spool valve technology, provide smooth and reliable operation and high efficiency,it’s higher bearing capacity than BMS series .
One type of LSHT motor,which can replace Danfoss OMT series ,M+S MT series ,Eaton 4000/6000 series etc.
Type | BMTE 160 | BMTE 200 | BMTE 230 | BMTE 250 | BMTE 315 | BMTE 400 | BMTE 500 | BMTE 630 | BMTE 800 | ||
displacement (cm3/rev. ) | 161.1 | 201.4 | 232.5 | 251.8 | 326.3 | 410.9 | 523.6 | 629.1 | 801.8 | ||
Max. speed (rpm) | cont. | 625 | 625 | 536 | 500 | 380 | 305 | 240 | 196 | 154 | |
int. | 780 | 750 | 643 | 600 | 460 | 365 | 285 | 233 | 185 | ||
Max. torque (N• m) | cont. | 470 | 590 | 670 | 730 | 950 | 1080 | 1220 | 1318 | 1464 | |
int. | 560 | 710 | 821 | 880 | 1140 | 1260 | 1370 | 1498 | 1520 | ||
peak | 669 | 838 | 958 | 1036 | 1346.3 | 1450.3 | 1643.8 | 1618.8 | 1665 | ||
Max. output (kW) | cont. | 27.7 | 34.9 | 34.7 | 34.5 | 34.9 | 31.2 | 28.8 | 25.3 | 22.2 | |
int. | 32 | 40 | 40 | 40 | 40 | 35 | 35 | 27.5 | 26.8 | ||
ure drop (MPa) | cont. | 20 | 20 | 20 | 20 | 20 | 18 | 16 | 14 | 12.5 | |
int. | 24 | 24 | 24 | 24 | 24 | 21 | 18 | 16 | 13 | ||
peak | 28 | 28 | 28 | 28 | 28 | 24 | 21 | 19 | 16 | ||
| rated | 80 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | |
cont. | 100 | 125 | 125 | 125 | 125 | 125 | 125 | 125 | 125 | ||
int. | 125 | 150 | 150 | 150 | 150 | 150 | 150 | 150 | 150 | ||
Max. inlet pressure (Mpa) | cont. | 21 | 21 | 21 | 21 | 21 | 21 | 21 | 21 | 21 | |
int. | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | ||
peak | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 30 | ||
Weight (kg) | 19.5 | 20 | 20.4 | 20.5 | 21 | 22 | 23 | 24 | 25 |
Characteristic features:
* Advanced manufacturing devices for the Geroler gear set,which use low pressure of
start-up, provide smooth and reliable operation and high efficiency.
* The output shaft adapts in tapered roller bearings that permit high axial and radial
forces.Can offer capacities of high pressure and high torque in the wide of applications.
* Advanced design in disc distrbution flow, which can automatically compensate in
operating with high volume efficiency and long life, provide smooth and reliable operation