Specifications

CBT HI-LO GEAR PUMP
Used for log splitters
Completely interchangeable
Low noise and long life

CBT HI-LO GEAR PUMP

 

1. The  hi/lo hydraulic gear pump provides max. pressure of 900 PSI for low pressure and 3000 PSI for high pressure,
2. It is  an ideal choice for log splitters, presses and similar equipment requiring rapid movement of the cylinder at low pressure prior to switching to the high pressure mode to meet load requirements.
3. 

   HI/LO  Gear Pump
   MODEL	FLOW GPM	PRESSUR/PSI)		DISPLACEMENT/ Cu.in/r		SPEED	D
   		LO/	HI/	LO/	HI/
   	3600r/min					RPM	IN	OUT
   CBT-6.3/2.1	8	400/900	3000	0.385	0.13	3600	1 IN PIPE	1/2 NPT
   CBT-6.3/3.0	8.5	400/900	3000	0.385	0.183
   CBT-6.3/3.6	9	400/900	3000	0.385	0.22
   CBT-8.8/2.1	10	400/900	3000	0.537	0.13
   CBT-8.8/3.0	10.5	400/900	3000	0.537	0.183
   CBT-8.8/3.6	11	400/900	3000	0.537	0.22
   CBT-8.8/4.2	11.5	400/900	3000	0.537	0.256
   CBT-10.9/2.1	12	400/900	3000	0.665	0.13
   CBT-10.9/3.0	12.5	400/900	3000	0.665	0.183
   CBT-10.9/3.6	13	400/900	3000	0.665	0.22
   CBT-10.9/4.2	13.5	400/900	3000	0.665	0.256
   CBT-13.0/4.2	16	400/900	3000	0.793	0.265
   CBT-15.2/7.6	22	400/900	3000	0.385	0.13
   CBT-22.9/7.6	28	400/900	3000	0.385	0.183