Specifications

SiBaCa/SiCaBa Alloy Inoculant for Steel Making Ferro Alloy
1> Original manufacturer
2>Free sample
3>Professional service

SiBaCa/SiCaBa Alloy Inoculant for Steel Making Ferro Alloy  

 

Inoculants are added in liquid cast iron in order to provide the best and consistent characteristics in the final casting. They are used to control matrix structure and avoid casting defects.

 

Inoculants can be found under several grain size distributions to satisfy the location of the inoculant addition within the foundry process. those locations of inoculant addition are known as in furnace, in ladle, in stream or in mould.

The addition of inoculants in liquid cast iron (gray and ductile irons) allowed to:

 

1)improve the homogeneity of the cast iron structure

 

2)eliminate the formation of carbides into thin parts or salient angles

 

3)direct the solidification towards the stable diagram, with graphite precipitation

 

4)refine the structure (higher cells count, finer grains in the microstructure)

 

5)improve mechanical properties

 

6)better separate slag and metal

 

7)decrease the tendency to dross formation

 

8)decrease tendency of micro-shrinkage

 

9)decrease risk of gas formation

 

10)decrease risk of mold / metal interface defects

Application

 

 

1)Homogeneous precipitation of graphite in gray iron casting, while avoiding undercooled graphite

 

2)Aiming for high number of graphite nodules in ductile iron casting

 

3)Avoidance of chilling, carbide formation and hard edges

 

4)Freedom from porosity

 

5)Improvement of mechanical and technical properties

 

Specification

 

Type		Chemical Composition
Model No.	Size	Si	Ba	Ca	Re	Fe
Ba3~65	0.5~2	60~65	2~4	0.5~2.5	/	balance
Ba5~60	2~5	55~60	4~6	0.5~2.5	/	balance
BaRe5~60.5	3~8	55~60	4~6	0.5~2.5	4~6	balance
Ba10~55	0.2~3 2~8	50~55	8~12	3.5~5.5	/	balance
Ba15~50	0.2~3 2~8	40~50	13~17	3.5~5.5	/	balance
Ba20~45	0.2~3 2~8	40~45	18`20	3.5~5.5	/	balance
Ba3~50	0.2~3 2~8	46~54	1.5~4	1~3	3~5	balance
Si72	0.3~2	70~72	/	1~3	/	balance

 

Company Profile

 

Anyang Huatuo Metallurgy Co., Ltd. is located in Anyang City, Henan Province of China. Anyang is rich in mineral resources. Our company has very convenient transportation, being near to Tianjin Port.

Our factory was founded in 2001,and with a total area of about 40,000 square meters, we have strong technical strength and advanced production equipment, and specialize in producing ferroalloy products. Our main productions are: steel-making deoxidizer, refractory raw materials, casting materials, water atomized products, welding powders and other related products. Especially, our best-selling products are alloy powder and silicon-iron alloy 

Our goods are welcomed to the majority of provinces and cities throughout the country and exported to many countries, including the U.S.A., India, South Africa, Mexico, Korea, and Japan.Good quality, good service and all the other advantages help us win the welcome from our foreign customers. Adhering to the business principle of "Quality First and Credit Supreme", we always focus on "development, innovation, management and service" and insist on technical reform at high level to develop new products. Therefore, we have garnered a great reputation among customers both at home and abroad.

 

Certificates