Product Name: Cr5Mo1V alloy tool steel
Product Type: Cr5Mo1V alloy tool steel
Product Brand: free-cutting steel

Detailed Description:

Material Name: Alloy tool steel
Grade: Cr5Mo1V
Standard: GB / T 1299-2000

Features and application:
Cold-working die steel, is the introduction of the United States, A2 steel, air hardening steel in the A category is the most widely used one. Applies to both wear also requested the toughness of cold-working die steel, can replace CrWMn, 9Mn2V steel production, small-scale cold stamping die, blanking die, forming die, and red top.

Chemical Composition:
C: 0.95 ~ 1.05
Si: ≤ 0.50
Mn: ≤ 1.00
S: ≤ 0.030
P: ≤ 0.030
Cr: 4.75 ~ 5.50
Ni: to allow the residual content of ≤ 0.25
Cu: to allow the residual content of ≤ 0.30
V: 0.15 ~ 0.50
Mo: 0.90 ~ 1.40

Mechanical Properties:
Hardness: Annealing, ≤ 255HB, indentation diameter ≥ 3.95mm; quenching, ≥ 60HRC

Heat treatment parameters and microstructure:
Standard heat treatment: quenching, 790 ± 15 warm, 940 ± 6 (molten salt) or 950 ± 6 (furnaces controlled atmosphere) heating, insulation 5 ~ 15min, air-cooled, 200 ± 6 tempered.

Delivery status: Delivery of steel to annealing.