Product Details

Prestressed Multi-stand Post Tensioning Concrete Anchor Head :

1. Specification: for 12.7mm or 15.24mm pc strand

2. Fast delivery.

3. Certification: ISO9001:2008, CNCC, CRCC

SPC	STRAND NO	ANCHOR BOLSTER A×B×φC	CORRUGATED PIPE INNER DIAMETER φD	ANCHORAGE φE×F	SPIRAL BAR		ANCHOR BOLSTER		Stressing Jack
SPC	STRAND NO	ANCHOR BOLSTER A×B×φC	CORRUGATED PIPE INNER DIAMETER φD	ANCHORAGE φE×F	φG×φH×1	CIRCLE	INSTALL HOLE	INSTALL HOLE	Stressing Jack
YJM15-1 YJM13-1	1			φ46×45 φ43×45					DC250Q YDC250Q
YJM15-2 YJM13-2	2			φ83×45 φ73×45					YCW100B YCW100B
YJM15-3 YJM13-3	3	φ135×85×66 φ130×80×63	φ50 φ50	φ87×45 φ78×45	φ130×φ10×50 φ130×φ10×50	4 4	φ112.5 φ110	M10	YCW100B YCW100B
YJM15-4 YJM13-4	4	φ136×100×66 φ136×95×68	φ55 φ50	φ93×50 φ87×48	φ140×φ10×50 φ136×φ10×50	4 4	φ115 φ115	M10	YCW100B YCW100B
YJM15-5 YJM13-5	5	φ146×120×71 φ146×120×73	φ55 φ50	φ103×50 φ97×48	φ152×φ10×50 φ146×φ10×50	4 4	φ126 φ126	M10	YCW150B YCW100B
YJM15-6 YJM13-6	6	φ164×135×80 φ155×120×77.5	φ70 φ60	φ117×50 φ107×48	φ170×φ12×50 φ155×φ12×50	4 4	φ140 φ135	M10	YCW150B YCW100B
YJM15-7 YJM13-7	7	φ164×135×80 φ155×120×77.5	φ70 φ60	φ117×50 φ107×50	φ170×φ12×50 φ155×φ12×50	4 4	φ140 φ135	M10	YCW250B YCW150B
YJM15-8 YJM13-8	8	φ176×150×85 φ167×140×81	φ80 φ70	φ127×52 φ117×50	φ180×φ14×50 φ167×φ12×50	5 4	φ153 φ146	M10	YCW250B YCW150B
YJM15-9 YJM13-9	9	φ185×150×90 φ175×150×88	φ80 φ70	φ137×52 φ127×50	φ180×φ14×50 φ175×φ12×50	5 4	φ162 φ154	M10	YCW250B YCW150B
YJM15-10 YJM13-10	10	φ210×160×97.5 φ190×175×93	φ90 φ80	φ147×52 φ137×53	φ190×φ14×50 φ190×φ12×50	5 4	φ188 φ166	M10	YCW250B YCW150B
YJM15-11 YJM13-11	11	φ210×187×99.5 φ196×185×96	φ90 φ80	φ157×54 φ147×53	φ190×φ14×50 φ196×φ14×50	5 4	φ180 φ166	M10	YCW350B YCW150B
YJM15-12 YJM13-12	12	φ210×187×99.5 φ196×185×96	φ90 φ80	φ157×54 φ147×55	φ190×φ14×50 φ196×φ12×50	5 5	φ185 φ176	M10	YCW350B YCW250B
YJM15-13 YJM13-13	13	φ220×216×105 φ196×205×96	φ90 φ80	φ157×62 φ147×55	φ190×φ14×50 φ196×φ14×50	5 5	φ190 φ176	M10	YCW350B YCW250B
YJM15-14 YJM13-14	14	φ234×252×110 φ206×230×103	φ90 φ90	φ167×62 φ157×57	φ240×φ14×50 φ206×φ14×50	6 5	φ200 φ186	M10	YCW350B YCW250B
YJM15-15 YJM13-15	15	φ234×252×110 φ216×230×108	φ90 φ90	φ167×65 φ167×60	φ240×φ16×60 φ216×φ14×50	6 5	φ200 φ196	M10	YCW400B YCW250B
YJM15-16 YJM13-16	16	φ244×286×115 φ220×270×108	φ90 φ90	φ177×65 φ167×62	φ240×φ16×60 φ220×φ16×60	6 5	φ210 φ196	M10	YCW400B YCW250B
YJM15-17 YJM13-17	17	φ258×320×116 φ230×300×111	φ90 φ90	φ187×70 φ177×62	φ240×φ16×60 φ230×φ16×60	6 5	φ218 φ206	M10	YCW500B YCW250B
YJM15-18 YJM13-18	18	φ234×252×110 φ216×230×108	φ100 φ90	φ187×70 φ177×65	φ240×φ16×60 φ230×φ16×60	6 5	φ228 φ206	M10	YCW500B YCW350B
YJM15-19 YJM13-19	19	φ234×252×110 φ216×230×108	φ100 φ90	φ187×73 φ177×65	φ240×φ16×60 φ230×φ16×60	6 5	φ228 φ206	M12	YCW500B YCW350B
YJM15-20	20	φ265×290×122	φ120	φ197×75	φ240×φ16×60	6	φ228	M12	YCW500A
YJM15-21	21	φ290×320×134	φ120	φ224×78	φ290×φ18×60	6	φ254	M12	YCW500A
YJM15-22	22	φ290×320×134	φ120	φ224×78	φ290×φ18×60	6	φ254	M12	YCW500A
YJM15-23	23	φ306×430×145	φ120	φ244×82	φ306×φ18×60	6	φ274	M12	YCW650A
YJM15-24	24	φ306×430×145	φ120	φ244×82	φ306×φ18×60	6	φ274	M12	YCW650A
YJM15-25	25	φ306×430×145	φ120	φ244×85	φ306×φ18×60	6	φ274	M12	YCW650A
YJM15-26	26	φ306×430×145	φ120	φ244×85	φ306×φ18×60	6	φ274	M12	YCW650A
YJM15-27	27	φ306×430×145	φ120	φ244×85	φ306×φ18×60	6	φ274	M12	YCW650A

Prestressed Multi-stand Anchor Head Anchor Block :

Multi-hole Anchorage structure drawing:

great quality best prestress anchorage wedges for pretension work

It includes some parts like limit board and anchor plate etc.

Its Hardness of manufacturer of industry wedge

work anchorage head and limit board: 25~4033HRC (306 HBS) work gripper :78~86HRA

Matched tensioning device manufacturer of industry wedge :

YCQQ series jack, ZB4-500 hydraulic pump

Heat treatment specification of manufacturer of industry wedge :

ISO9001 - 2008 & JB/T3999-1999

(Carburizing or carbonitriding and post–quenching and tempering of steel part)

During the Heat treatment permeability, nitriding, quenching, tempering process , The computer control process parameters of multi-purpose furnace, and set up quality control points according to the requirements of ISO9001 - 2008 quality assurance system, after heat treatment ,the hardness, tooth type, appearance have to pass a rigid thoroughly inspection, to ensure high qualified products.

All the procedure was controlled by a computer according to JB/T3999-1999

FAQ

Q: Are you trading company or manufacturer ?

A: We are factory.

Q: How long is your delivery time?

A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ?

A: Yes, we could offer the sample but do not pay the cost of freight.

Q: What is your terms of payment ?

A: 50% T/T in advance ,balance before shippment.

We provide after-sale service, technical support, personalization and processing, production on-demand and strictly in accordance with the buyer requirements to provide quality services. Provide engineering construction for bridge,railway,building etc,and maintenance and reinforcement of bridge.We have a strong engineering team who are all qualified and resolve kinds of problems during construction.If you have another question, pls feel free to contact us.

If you have interest in our products, please feel free to contact me any time.