SOLVENT-BASED ,CEMENT MORTAR PAINT

TYPE

The solvent-based for cement based on alkali resistant acrylic resin.

USES

Top coat for cement products.

CHARACTERISTICS

1. Fast drying and very good workability

2. Excellent water resistance, weathering and gloss retention.

3. Excellent adhesions to gypsum putty and cement surface.

4. Excellent resistance to alkalis.

COLOR

Desired colors

WEIGHT

Above 1.0 kg/L

VISCOSITY (25 ℃)

70– 95 KU (25 ℃)

DRYING TIME (25 ℃)

Set-to-touch 0.5 hrs. Dry hard 2 hrs. (25 ℃)

OPTIMUM FILM THICKNESS

Wet 85μ(microns) Dry 35μ(microns)

OVERCOATING INTERVALS (25℃)

Min. 3 hrs. (25 ℃)

NON-VOLATILE CONTENT

Above 40%

THINNER

Xylene

THINNING RATE

0~50 %

STORAGE SHELF LIFE

Minimum 1 year under normal storage conditions.

APPLICATION METHOD

Airless Spray, Brush, Roller.

NOTE

1. The moisture content of new constructed cement walls

     should be lower. If not, the application has to wait for 2 or 3

     weeks until the wall is dry completely. Otherwise, too much

     moisture and alkali may affect film performance and

     adhesion.

2. Adhered moisture, grease, and dirt on substrate must be

    cleaned thoroughly.