Specifications

CRB-815C test bench can fulfill test tasks for all kinds of common rail pumps and injectors, in manual or automaticly mode

Features
 Designed especially for testing common rail fuel systems automatically, including a commonrail pump and 6 solenoid injectors.
Refrigerator type test oil cooling system
A gear flow meter imported from German is used to measure test oil flow rates.
Genuine Bosch components, such as fuel rail, DRV valve, are used in the equipment.
Measure automatically the common rail pump parameters, such as pump flow rate, return flow rate,fuel rail pressure, sealing, DRV and ZME performance. The system provides a report to indicate whether
each and every parameters are passed the qualification, by comparing the measured results
with the standard data in the database.
Measure automatically the common rail injectors of various kinds, in four steps, leak test,VL (full load), LL (idle), VE (pilot).  The system provides a report to indicate whether each andeveryparameters are passed the qualification, by comparing the measured results with the standard data in the database.
Windows OS, easy to operate. Allow to add new test data by the user.
Save and print user info and test report.
System upgradable, 
Provide various protections for the operator and the equipment with respective indicators,such as over-heat,over-pressure, test oil under-level in tank and defogging.
Accessories to test EUIs and EUPs, optional
Test 6 piezo injectors, optional 
Test Bosch VP37 and VE37 pumps, optional
Specification
AC Power Supply: 3-Phase, 380/230V, 50/60Hz
Main Motor Power: 11KW, 15KW
Main Motor Speed: 0~4000rpm
Rail Pressure: 0~2000bar
Rail Pressure Accuracy: ±5bar
Flow Meter Range: 0.008~2L/min
Flow Meter Accuracy: 0.3%
Test Oil Temperature: 40±2℃
Test Oil Filtration Requirement: <5mm
Test Oil Tank Volume: 80L
Dimension: 1780×900×1800(mm)

Net Weight: 1000Kg