Specifications
Corrugated roof sheet waved iron sheet
1 Thickness: 0.14mm-0.6mm
2 Width: 665mm-930mm
3. Full hard
4. Decoration sheet
5.Zinc coated:40g
Our advice for you;YX12-65-850
wave height;12mm
two wave's width:65mm
effective width:850mm
color: as you request
Method
Metal sheet is a square fluted profile with an effective covering width of 850 665... designed for use as side cladding or roofing
material in commercial, industrial and residential buildings. The name IBR is abbreviated from "Inverted Box Rib" and has became
a household name in the foreign market
The deep broad flute design offers excellent drainage characteristics combined with optimum weight versus load/span capabilities.
Structural guidelines.
IBR roof sheets are available in a wide range of materials displaying various structural properties. It should be noted that the load
span characteristics are only to be used as a broad guideline as purlin spacing is also dependant on other factors such as the prevailing
winds in a certain area, snow during winter periods, the presence of dust and other particles in industrial areas, the type of structure
that is being erected etc.. We therefore recommend that an engineer is consulted to determine the purlin spacing for a specific application.
Available dimensions
IBR sheeting is available in standard lengths up to 15 metres. The permissible length tolerance for the standard length range will be -+5 mm.
Sheets outside these parameters are available on request and might be subject to special pricing arrangements. The maximum height which
can be transported is 4.3 metres. This factor should be taken into account when bullnoses and curves are designed.
Roof pitch
When using IBR, the recommended minimum pitch for roof slopes in excess of 30 m is 7.5º and for slopes less than 30 m is 5º. When IBR roof
sheets are end lapped the roof pitch should be taken into account. The minimum end laps for roofs pitches in excess of 15º is 150 mm and for
other roofs a minimum of 250 mm is recommended. End laps for side sheeting should be at least 100 mm. It is recommended that end and side
laps on low pitch roofs are sealed to ensure watertightness.
Packing
ACCESSORY
Although we are one-year Alibaba member. But we have 14-year experience in building material and masonry material in domestic market.
trust us and we will give u a better future. Many soho through our company to export we open the foreign trade. foreign customer often
check the quality of our product. we would try our best to help u. best quality and service to u. Recently, we open the trade assurance, If u don't satisify
my product ,back it.