Product Details

TS16949 ! 1.12mm hot dipped galvanized iron wire for automotive parts

TS 16949 Control Cable Steel Wire

Products Introduction:

Nominal Diameter	Minimum number of reverse bends			Minimum number of Torsions (Bright and Class B)			Minimum mass of coating (g/m2)
	(Bright and Class B)			Minimum number of Torsions (Bright and Class B)			Minimum mass of coating (g/m2)
	1770 Mpa	1960 Mpa	2160Mpa	1770 Mpa	1960 Mpa	2160Mpa	Class B
over 0.6mm ~incl. 0.65mm	11	10	9	28	25	23	60
over 0.65mm ~incl. 0.70mm	10	9	8	28	25	23	60
over 0.70mm~incl. 0.75mm	16	15	14	28	25	23	60
over 0.75mm~incl. 0.80mm	15	14	13	28	25	22	60
over 0.80mm~incl. 0.85mm	13	12	11	28	25	22	70
over 0.85mm ~incl. 0.90mm	12	11	10	28	25	22	70
over 0.90mm~incl. 0.95mm	11	10	9	28	25	22	70
over 0.95mm ~incl. 1.00mm	10	9	8	28	25	22	70
over 1.00mm ~incl. 1.10mm	17	16	14	26	23	21	80
over 1.10mm ~incl. 1.20mm	16	15	13	26	23	21	80
over 1.20mm ~incl. 1.30mm	15	14	13	25	22	20	90
over 1.30mm ~ incl.1.40mm	13	12	10	25	22	19	90
over 1.40mm ~incl.1.50mm	11	10	9	25	22	19	100
over 1.50mm ~incl. 1.60mm	14	13	12	25	22	19	100
over 1.60mm ~incl. 1.65mm	13	12	11	25	22	19	100
over 1.65mm~incl. 1.70mm	13	12	11	25	22	19	100
over 1.70mm~incl. 1.80mm	11	11	10	25	22	19	100
over 1.80mm ~incl. 1.85mm	10	10	8	24	21	18	100
over 1.85mm ~incl. 1.90mm	10	10	8	24	21	18	115
over 1.90mm~incl. 2.00mm	9	9	7	24	21	18	115

Quality Control:

Total quality control. Every pieces of the raw material; semi-finished products and finished products are tested and recorded in file. The tracking record is used from final products to the very first beginning raw material steel factories.

Third Part like SGS is available for test control before shipment

Sales Territory:

South America; North America; South Korea; Australia, Europe; Middle East; etc

overview:

process

certificate

our product