Product Details

EM-GJ series Soft Starter cabinet

Brief Imformation:

EM-GJ series Soft Starter is a new type start-up equipment which integrates electric force and electronic techniques, computer technique and modern control theory. It is the new generation product to replace the conventional Star-delta Starter, Self-coupling voltage-drop Starter and Magnetic control voltage-drop Starter.

Feature:

Advanced soft starter type: "voltage control type" and "current limiting type".
Capacity to motor effectively, so it could save the cost.
Intelligent, digital and single chip control.
Man-machine conversation function.
Delay starting function. Operation current displayed.
Failure self-diagnosis.
Natural wind cooling. Space saving.
Can reduce the starting stress of motor and other loading equipments, so that lengthen their service life.
The function of soft stopping can solve effectively the surging problem of inertia system when stopping.
The perfect and reliable protection features, can give the effective protection to the operator's safety as well as the motor and matched equipments. Such over voltage; over current, over load, over heat, short circuit , lower voltage, input or output phase failure; three phase imbalance, starting time over long protection etc.
The application of intelligent and network technique make the EM-GJ3 type Soft Starter meet the high -tech development of Electrical force automated technique effectively.
The reliable function and quality is the basic of the best service. even more, we can supply the special designing and functions of product matched to your need ,and ,the timely and perfect application consulting service.

Item		Description
Input Power Supply	Input Voltage	Three-phase 220V/380V/480V AC
Input Power Supply	Frequency	50/60Hz
Adaptive Motor		Squirrel-cage three-phase asynchronous motor
Starting Times		It is recommended not to exceed 20 times per hour.
Control Mode		(1) Operation panel control; (2) Operation panel + external control; (3) External control; (4) External control + COM control; (5) Operation panel + external + COM control; (6) Operation panel + COM control; (7) COM control; (8) No start or stop operation.
Start Mode		(1) Current-limiting start; (2) Voltage ramp start; (3) Kick start + current-limiting start; (4) Kick start + voltage ramp start; (5) Current ramp start; (6) Voltage current-limiting double closed-loop start.
Stop Mode		(1) Soft stop; (2) Free stop.
Protective Function		(1)Open loop protection for external instantaneous stop terminals; (2) Over-heat protection for soft starter; (3) Protection for too long starting time; (4) Input open phase protection; (5) Output open phase protection; (6) Unbalanced three-phase protection; (7) starting over current protection; (8) Running overload protection; (9) Under voltage protection for power voltage; (10) Overvoltage protection for power voltage; (11) Protection for fault parameter setting; (12) Load short circuit protection; (13) Auto restart or incorrect wiring protection; (14)Incorrect wiring protection of external control stop terminals.
Ambient	Place to be used	Indoor location with good ventilation free from corrosive gas and conductive dust.
	Altitude	Below 3000M. It have to rise the rate power when the altitude is more than 3000M.
	Temperature	-30 +55 oC
	Humidity	90%RH without dew condensation.
	Vibration	<0.5G
Structure	Protection Class	IP20
Structure	Cooling Pattern	Natural wind cooling.

Soft starter connection and main circuit connetion diagram:

Soft starter connection diagram

Main circuit connection diagram

Factory to shoot:

Application:

The loading	Voltage ramp starting time(s)	Voltage ramp stopping time(s)	Initial voltage	Voltage ramp (current limit)	Current limit to start
Ball mill machine	20	6	60%	400%	350%
Fan	26	4	30%	400%	350%
Centrifugal	16	20	40%	400%	250%
Piston compressor	16	4	40%	400%	300%
Lift	16	10	60%	400%	350%
Stirring machine	16	2	50%	400%	300%
Breaker	16	10	50%	400%	350%
Screw compressor	16	2	40%	400%	300%
Rotating conveyor	20	10	40%	400%	200%
Light load	16	2	30%	400%	300%
Convey belt	20	10	40%	400%	250%
Heat pump	16	20	40%	400%	300%