Product Details

Hot Dipped Galvanized Armouring Wire 0.17mm

Steel Grade Sae 1006; Sae 1018;Q195
Standard JIS
Wire Gauge 0.17mm
Place of Origin Tianjin, China
Type Galvanized
Application Netting
Alloy Or Not Non-alloy
Special Use Cold Heading Steel
Model Number 0.17mm
Brand Name Huayuan

Product Features

Specifications

Hot Dipped Galvanized Armouring Wire 0.17mm
1Tensile Strength:390Mpa-500Mpa
2.Zinc Coat:min f15g/m2
3. Coil; Spool

0.17mm Hot Dipped Galvanized Iron Wire for Armouring Cable

 

Technical Armouring Wire is a soft, heavily Zinc coated wire used in the power, terrestrial and marine communications industry for binding electrical cables which are used in places where the cable maybe subjected to crushing or other injury. 

Low carbon armouring wires are produced to meet the requirements of Australian Standard
 AS 3863 "Galvanised Mild Steel for Armouring Cables"; BS EN 10244 etc. High carbon armouring wires can be produced to customer requirements on request. 

Armouring wire is available in diameters ranging from 0.9mm to 8.0mm and is available in either coils or stems.

Armouring Wire Specifications

Diameter Tolerances

 

Nominal Wire Diameter

Tolerance (mm)

over 0.15mm up to and incl. 0.80mm

over 0.80mm up to and incl. 1.60mm

over 1.60mm up to and incl. 2.50mm

over 2.50mm up to and incl. 4.00mm

over 4.00mm up to and incl. 5.00mm

over 5.00mm up to and incl. 8.00mm

+/-0.02

+/-0.03

+/-0.03

+/-0.03

+/-0.04

+/-0.04

 

 

 

Galvanised Coating Weight - AS3863; EN 10244

Wire Diameter

Minimum Ctg Mass (g/m2)

0.14mm

0.25mm

0.40mm

0.45mm

0.50mm

0.90mm

1.25mm

1.60mm

2.00mm

2.50mm

3.15mm

4.00mm

5.0mm

6.0mm

8.0mm

15

30

30

30

30

150

200

230

240

260

275

290

320

350

430


Tensile Strength (MPa)

The tensile strength is defined as the maximum load achieved in a tensile test divided by the cross sectional area of the wire test piece. The tensile strength range for Armouring Wire is 340 to 500 MPa.

Steel Chemistry

The table below is indicative of steel chemistries used for low carbon Armouring Wire.

Element

%

Carbon

Phosphorus

Manganese

Silicon

Sulphur

0.05 max

0.03 max

0.50 max

0.12/0.18

0.30 max

 

Quality Control & manage system

Entire producing process is supervised from raw material to installment on field site.

Qualified Inspector tests each processing as per relative standard and Testing Certificate

 

Products management system

Save your time and get all relative products in one stop

 

Feature products  

1) Galvanized iron wire with zinc coating 500g/m2

2) Maxiumu Diameter of the wire: 8mm

 

Photos of Factory

 

Hot Dipped Galvanized Armouring Wire 0.17mm

You May Like

Find Similar Products By Category

You May Like

View More
Chat Now Contact Now