Specifications

1,mobile signal booster
3,Coverage:300 square meters
4,Up-link Gain: 50dB
5,Down-link Gain: 55dB

850/900/1800/1900/2100 dual band signal repeater /booster /amplifier , mobile signal booster Products instruction

Technical Features:
*Receiving and sending separation,low require for Ant isolation,making it  convenient for installation.
*Mini design with metal cavity filter technology inside.
*Full-duplex&dual-port design,and built-in power supply,making it convenient  for installation.
*Allowing for continuous gain adjustment 31dB by 1dB step.
*ALC technology used to provide auto amplitude fixing.
*Modules structures,making it convenient for installation,debugging and maintenance.

 

Technical Parameters

 

Item	LM-GW-23A
Frequency Range (Mhz)	Uplink:     890-915MHz     1710-1785MHz                                                         Downlink: 935-960MHz     1805-1880MHz
Gain (dB)	Uplink Gp≥55   Downlink  ≥60dB
Pass Band Ripple	≤5dB
band flatness	≤+3dB
Guard Band Rejection	(BW-60dB)≤42MHz ,(BW-70dB)≤45MHz
I/O Impedance	50Ω/N connector
I/O Return Loss	≤-8dB
Export Power (Po)	≥23dBm
Intermodulation Attenuation(Po=13dBm)	≤-40dBc
Transmission Delay	≤0.5μs
Ambient Temperature	-10°C~50°C
Power Supply	AC110~220V±10%   45~55Hz
Size	135.8x168x29.3mm
Reliability	To the GB6993-86 Standard
Electromagnetic compatibility	To the ETS300 694-4 Standard
Function	a) Power supply LED denote b) Export power LED denote

Technical Features                                                                                                                                       
♥ Receiving and sending separation,low require for Ant isolation,making it convenient for installation.
♥ Mini design with metal cavity filter technology inside.
♥ Full-duplex&dual-port design,and built-in power supply,making it convenient for

installation.
♥ ALC technology used to provide auto amplitude fixing.
♥ Modules structures,making it convenient for installation,debugging and maintenance.

Installation Approaches:

♥ Fix up outdoor antenna reception on housetop and point to signal tower

♥ Connect outdoor antenna to 'outdoor' port in repeater machine through cable

♥ Connect indoor antenna(s) to 'indoor' port in repeater machine through cable also

♥ Plug power adaptor into AC power socket and finish installation

Technique Supporting:

♦ If still no signal receipt after activated repeater, please check if outdoor antenna point to

signal tower or elsewhere have strong signal and check if strength achieve -70DBM.

♦If strength is not steady, please check if outdoor and indoor antenna are too close.

Please ensure the outdoor and indoor antenna have distance of 20 meters at least ,

with a wall between and net a same horizontal line

 Picture show: