1. grafting blade cuts branches up to1/2" in diameter

2. easy to use

3. omega cut

4. accurate grafting

5. reversible blade

6. hold the grafting stock in the grafting tool and squeeze the handle to make the cut, repeat this step to cut stem from the donor plant.

7. take care to ensure that the groove is cut in the stock plant.

8. slide the donor stem into groove of the stock plant, matching the cut serfaces as closely as possible.

9. Place sterlizing material around the join, and binder with tape, the sterilizing material will protect against bacteria and weather conditions

10. use the pruner to cut useless branches from the plant

STEP 1:

Put the grafting stock into the grafting tool and squeeze the handle to make the cut, repeat this step to cut stem from the donor plant,pay attention to ensure that the groove is cutted from the stock plant.

STEP 2:

Slide the donor stem into the groove of the stock plant,matching the cut surfaces as closely as possible,if the stock and donor plant are not the same size,match on the side only.

STEP 3:

Place sterilizing material around the join,and bind with tape, the sterilizing material will protect against bacteria and weather conditons.

STEP 4:

Use the pruner to cut useless branches for the plant.

STEP 5:

The grafting tool with "U""V""Ω"blade and the end of blade both can cut,one piece blade can be used as two pieces blade, so you would have total six pieces blade.