Name: Colorful High Strength Fireproofing Waterproof Materials Reinforced Fiber Cement Paint Free Board
Brand: JORI
Availability: InStock

Product Details

Colorful High Strength Fireproofing Waterproof Materials Reinforced Fiber Cement Paint Free Board

Product Description

Features:
Our Paint Free Board (PFB) is a new green & environment material. It is produced by high temperature & high pressure used in interior and exterior wall decoration. The surface doesn’t need any treatment. Easy for construction, save time and save cost. Also keep the natural texture and color.

Recommend Application:
1.Exterior wall: Hotel, Stadium, School, House, Office, Supermarket, Store, Villa, and Apartment.
2.Interior wall: Subway, Office, Meeting room, Tunnel, Market, Hotel, Washing room, Passageway & large spots.

Specification & Size:

Thickness	5mm,6mm,8mm,9mm,10mm,12mm
Size	1220x2440mm,1200x2400mm, other sizes according to the order
Asbestos content	Free of asbestos
Density	1.2-1.5 g/cm³
Thermal conductivity	≤0.3 W/(M.K)
Water content ratio	≤10%
Water absorption (plain)	≤30%
Swelling rate	≤0.25%
Thermal shrinkage	≤0. 5%
Anti-bending strength	≥12Mpa
Water tightness	The reverse side allows showing water mark but not dropping after 24 hours
Freezing resistance	It doesn’t show break and layer after 25 times freeze thawing
Impact resistance	Without continuous crack after one shock
Incombustibility	Class – A1

Property Contrast on Common Decorating Materials:

Item	Our Board	Gypsum Plaster Board	Magnesium Board	TK Board(Glass Fiber Cement Board)
Raw Materials	Cement, Quartz Sand, Organic/ Inorfil Cellulose Fiber	Gypsum, Paper	Magnesium Oxide, Magnesium Chloride	C-Glass, Short Mineral Wool, Low Alkali Portland
Anti-Bending Strength (Mpa)	≥12	4~5	≤12	6~8
Fire-proof Rate	A-class incombustible (GB8624-1997)	Non- Flammable	Incombustible	Incombustible
Incombustibility (min)	≥240	60	50	70
Damp-proof Rate	After wetting, the strength drops by 20%-40%, recovers by 100% after dryness	Distortion after wetting, beyond retrieve	Distortion after wetting, beyond retrieve	Distortion after wetting, beyond retrieve
Use Age	Used for many years	Sagging because of absorbing the Moisture in the air, short lifetime	Sagging because of absorbing the Moisture in the air, short lifetime	Distortion after wetting, beyond retrieve, Short lifetime

Product Series:
Concrete color: white, light gray, dark gray
Multi color: red, green, yellow, brown, black

Exterior Wall Installation
Construction Main Points: Mostly use the dry-joint process, the surface should be treated with water-proof coating, like clear varnish or clear resin coating.

Interior Wall Installation
Construction Main Points: According to the spot and design, PFB board can be cut with toothless saw in site or offer the finished products edged 45°. Directly pasted if the wall is flat. If not, pls used the wood board as base to paste. And the fasten with nail. Also level with wood keel and then fasten with nail.

1.Carrying: Notice the corner, two people lift up boards together, apart hands as you can to lift the boards’ long edge and carry erectly, prevent the boards over bending. When the thickness is no more than 8mm, it is recommended to overlap two sheets together to carry, single people’s carrying and short edge’s lifting are both forbidden.

2.Storage: Make sure the bottom level, each mound’s height is no more than 800mm, one stocking’s height is no more than 2500mm, do not place erectly and loosely but to be ordered as per the sizes and types, keep the boards in a dry place without water leaking and seeping.

3.Processing: The common this saw is suitable for cutting boards by hand, but if many boards have to be cut on spot, it is recommended to use electric round diamond saw. For round or arc cutting, electric curved saw is OK. Electric drill or hole saw can be used at will on boards. The cutting place should be well- ventilated with dust collection system, the workers must wear dust protecting mask.

Our Services

Our professional Work Team who will be available waiting for you at 24 hours per day, 7 days per weeks.

Why Choose us ?

Our Mission:

To provide a More Cost Efficient Solution for our customers. Suitable is the Best Way, Best for customers, for local market and even for our future. We treat it as our responsibilty in every business.

Our Goal:
To get Trust from every customers who contacted with us. To show our sincerely in communication and our professional skills in business, and even to provide the most suitable machines for them to satisfy with their special need. We hope we can get the comments like: Best Machines, Best Service and Best Person which we met, after customers received our machines in their local side.

Our Culture:
To be Professional and Progress together. We treat every staffs as a family member, We learned, We shared and We worked together to reach our goals. We will be better and better as long as we ALL progress together every minutes. A little change everyday makes a big difference someday.

DALIAN JORI CO.,LTD will be your Best Choice for business cooperation of ALL kinds of Engine Rebuilding & Auto Maintenance Machines in China. Contact Us Now !

Trading Process