High Strength Fireproofing Waterproof Materials Reinforced Fiber Cement Board
Features:
Our fiber cement board is stable performance and light weight building & decoration board used cement as major and natural fiber reinforced, with the process of pulping, emulsion, forming, pressing, autoclaving, drying and surface treatment. The color is gray. With the sanding surface, thickness uniformity is better and grain is clearer. And because of the cement, the strength is higher, and water proof performance is much better. So fiber cement board is the highest quality product in the domestic and foreign building materials market.
Product standard: JC/T412-2006<Fiber Cement Flat Silicate Board>
Recommend Application:
1. Interior dry wall decoration board.
2. Interior wall after painting and coating.
3. Building partition board.
4. Suspended ceiling tiles.
5. Fire rating requirement of partition wall and ceiling.
6. Exterior wall cladding, roof lining board, light weight grouting wall panel.
Specification:
Fire-proof Rate | A-class incombustible (GB8624-1997) |
Incombustibility (min) | 240 minutes (GB/T9978-1999) |
Density | 1.2-1.5 g/cm³ |
Water content ratio | ≤30% |
Swelling ratio | ≤0.40% |
Anti-bending strength | ≥16Mpa |
Frost resistance | Do not appear cracking and delamination after 25 cycles of freezing and thawing (GB/T7019-1997) |
Radioactivity | Standard of GB6566-2001 ( A-class Decoration Materials) |
Size:
Thickness (mm) | Length x width (mm) | Surface | Edge |
5 |
2400x1200mm 2440x1200mm 3000x1200mm Cut as the requirement |
Single, double surfaces sanding |
Square edge, Tapered edge |
6 | |||
8 | |||
9 | |||
10 | |||
12 | |||
14-30 |
Property Contrast on Common Decorating Materials:
Item | Our Board | Gypsum Plaster Board | Magnesium Board | TK Board(Glass Fiber Cement Board) |
Raw Materials | Cement, Quartz Sand, Organic/ Inorfil Cellulose Fiber | Gypsum, Paper | Magnesium Oxide, Magnesium Chloride | C-Glass, Short Mineral Wool, Low Alkali Portland |
Anti-Bending Strength (Mpa) | ≥12 | 4~5 | ≤12 | 6~8 |
Fire-proof Rate | A-class incombustible (GB8624-1997) | Non- Flammable | Incombustible | Incombustible |
Incombustibility (min) | ≥240 | 60 | 50 | 70 |
Damp-proof Rate | After wetting, the strength drops by 20%-40%, recovers by 100% after dryness | Distortion after wetting, beyond retrieve | Distortion after wetting, beyond retrieve | Distortion after wetting, beyond retrieve |
Use Age | Used for many years | Sagging because of absorbing the Moisture in the air, short lifetime | Sagging because of absorbing the Moisture in the air, short lifetime | Distortion after wetting, beyond retrieve, Short lifetime |
1. Carrying: Notice the corner, two people lift up boards together, apart hands as you can to lift the boards’ long edge and carry erectly, prevent the boards over bending. When the thickness is no more than 8mm, it is recommended to overlap two sheets together to carry, single people’s carrying and short edge’s lifting are both forbidden.
2. Storage: Make sure the bottom level, each mound’s height is no more than 800mm, one stocking’s height is no more than 2500mm, do not place erectly and loosely but to be ordered as per the sizes and types, keep the boards in a dry place without water leaking and seeping.
3. Processing: The common this saw is suitable for cutting boards by hand, but if many boards have to be cut on spot, it is recommended to use electric round diamond saw. For round or arc cutting, electric curved saw is OK. Electric drill or hole saw can be used at will on boards. The cutting place should be well- ventilated with dust collection system, the workers must wear dust protecting mask.
Our professional Work Team who will be available waiting for you at 24 hours per day, 7 days per weeks.
Our Mission:
To provide a More Cost Efficient Solution for our customers. Suitable is the Best Way, Best for customers, for local market and even for our future. We treat it as our responsibilty in every business.
Our Goal:
To get Trust from every customers who contacted with us. To show our sincerely in communication and our professional skills in business, and even to provide the most suitable machines for them to satisfy with their special need. We hope we can get the comments like: Best Machines, Best Service and Best Person which we met, after customers received our machines in their local side.
Our Culture:
To be Professional and Progress together. We treat every staffs as a family member, We learned, We shared and We worked together to reach our goals. We will be better and better as long as we ALL progress together every minutes. A little change everyday makes a big difference someday.
DALIAN JORI CO.,LTD will be your Best Choice for business cooperation of ALL kinds of Engine Rebuilding & Auto Maintenance Machines in China. Contact Us Now !