Product Details

Brief Introduction

be customer-made vertical material lift high strength steel wheelchair platform

our wheelchair for disabled lift consists of a platform with high side walls, an upper landing gate, a platform mounted gate, a drive system and easy-to-use operating controls.

Wheelchair lift is divided into two types according to material, which Spray type and Stainless Steel type.

Features

1.Stair lifts are completely safe,absolutely consistent and easy to use.

2.Nove design and nice appearance.

3.Perfect stability and safety.

4.Low noise.

The Degree:

Technical Parameters

/VL/Y Accessible lift platform
Power	220V/50HZ/25A
Platform size	1400mm*1000mm
Self-height	65mm
Max Lifted height	8000mm
Lifting speed	0.06-0.1m/s
Load capacity	300kg
Type of entrance and exit	90 or 180 degrees
Platform	checkered plate
Auto-flap working angle	75 degrees
Weight	less than 400kgs
Lifting system	hydraulic or screw
Control voltage	24V/DC
Lifted type	Self-resetting system
Overload protection	Over -current relay control
Working Temperature	20 below zero to 60 degrees
Install type	Non-pit installation,directly fixed to concrete floor
Emergency stop	The lifting and lowering process can be stopped immediately by pressing the emergency button.
Manual control	pressing the manual value or turning screw
Safety fence	there have fence blow the platform,when it descending,if touch angthing,it will stop.