Product Details

Specifications

Self-Propelled Rough-Terrain Scissor lift JCPT-23RT
1.Capacity:1000kg/680kg
2.Working height:12-18m

Self-Propelled Rough-Terrain Scissor lift JCPT-23RT

Product Intro:

The product is mainly applied in the fixing, constructing, detecting and maintenance of large-scale bridge, steel structure workshop and sorts of aerial equipment. It can be used in all kinds of rugged terrain. CE certified.

1)Structure: scissors, enable extended-platform, good performance of elevating and loading.

2)Sole control system, drive mode: 4×4, maximum speed:6.5km/h.

3)Gradeability:40%.

4)Tilt alarm, the auto-leveling system of four crutch-leg .

5)Emergency down-valve device.

6)Double anti-press protection: electric-control and safety-web.

Model			JCPT1223RT	JCPT1523RT	JCPT1823RT
Lift Rated Capacity		kg	1000	680	680
Platform Extend Capacity		kg	227
Wind speed 45km/h				45km/h
Max. Machine Height		mm	12000	15000	18000
Max. Platform Height		mm	10000	13000	16000
Overall Length		mm	4880
Overall Width		mm	2270
Overall Height		mm	2760	2980	3150
Platform Size		mm	3980X1830
Platform Extend Length		mm	6570X1830
Ground Clearance		mm	220
Wheelbase		mm	2860
Turning radius-inside/outside		mm	2040/5200
Motor	Perkins404D22		38kw/3000 rpm
	Kubota V2403-M-DI		34kw/2400 rpm
Drive speed-stowed		km/h	6
Drive speed-raised		km/h	1.1
Raise/lower speed		sec	45/29	94/77	114/94
Gradeability-stowed		%	50	50	40
Max angle		.	3
Hydraulic oil box		L	130
Diesel tank		L	100
Tyre(solid tire)			33x12-20
NW		kg	7300	7800	8700

Standard Configuration
-Can bus line intelligent controller
-Proportional controller
-Automatic pot hole protection system
-4x4 drive
-Floating bridge
-Tilt protection
-Tilt alarm
-Horn
-Working chronometer
-Emergency pump
-Electric circuit fault code display
-Extended platform
-Rotary strobe light
-Euro Ⅲ emission standard engine
-Overload limit

Optional Configuration
-Hydraulic electric welding machine
-Hydraulic generator
-Hydraulic air compressor
-Hydraulic high pressure water pump
-Hydraulic oil radiator
-AC power source connected to platform
-Working lamp