stable magnetic liquid level switch
USD $4.5 - $4.5 /Piece
Min.Order:5 Pieces
Dongguan Jinhefeng Industrial Electrical Co., Ltd.
W3/8-NP liquid level switch
Figure1 Figure 2
W4-P | Small power | High power |
Rated power | 10W | 50W |
Working voltage | 3 V DC | 220VAC/DC |
Working carry current | 0.5A | 1.0A |
Breakdown current | 1A | 1.5A |
Temperature range | -10 ℃ ~+85 ℃ | |
Material | PP | |
Sensing water voltage | 0.3gf/cm2 | |
Type of interface | 1/2' (thread cusotmized) | |
Installation Angle | horizontal,vertical,lean |
The flow switches are installed on the water pipe through series connection or parallel connection,It is used in hydraulic pressure (air pressure) to drive magnetic induction and convey switch signals.
The flow switch send on or off signal according to the flow volume, it is an important component of the fluid flow controls system.If the flow in the pipe is lager than start-up volume, the magnetic valve will be moved by the force of flow pressure, and then it will trigger the reed switch that same sealed in the vavle and send the signal . When the flow volume reduce lower than the start-up volume,magnetic valve core will be forced back to theoriginal place by the reset spring in the vavle.
The flow switches series products
Flow switch as the fluid flow control device, which is widely used in different area. Its working principle:Flow switch has a flow channel, there is one permanent magnetic sealed in the channel at setting piston. INworking the fluid flow will give one certain pressure, then the piston will pushed by fluid pressure and caused the magnetic piston seal inside the device trigger the reed switch closed or open, The diameter of the piston affected its working pressure. If you reduce the flow, the pressure will be with smaller ,stainless steel spring will push piston to the reset point. So the reed switch will be affected(open or closed), it can remote alarm or switch action, and also can used as feedback signal in the automatic control system. The flow switch has a simple structure , high sensitivity, durability and other advantages.
Flow switches Application
Gas and liquid dual-use, it can be widely used in industrial automation, machinery and equipment, industrial compressed air, refrigeration HVAC fields. Flow switch magnet is not flowing waterways, normally used for sewage system pipe.
Adaptation
1. Away from magnetic objects or environment.
2.Output signal is switching, the control object connections must also switch controlling relationship.
3 .the control object signal power shall not exceed the load capacity.
4. The aqueous medium control device is a device available for other medium control. A variety of size,
Jinhefeng industrial electrical co., ltd is devoting to designs and manufacture the sensing switch for more than 10 years .we have striven and now provides some of the best sensor solutions for liquid level, in addition to pressure and temperature measurement, for the most demanding float switch applications. Whether you need a single point float switch or continuous liquid level sensor, JHF Company can direct you to the proper float switch and liquid level sensor solution. Our Company offers standard float switch sensors in stock for same day shipment, and can also custom configures multiple-point float level switches in only 3 days.
We manufacture float switches that stand up to harsh environments, hazardous locations and pressures,sanitary and food grade. Many JHF float switch designs meet agency approvals like ROHS and ISO,and our sensor are widely used the food and beverage ,medical equipment ,industrial equipment and etc.
Whether you need a float switch, continuous liquid level sensor, pressure or temperature sensor, utilized in Water and Waste Water Tanks, Food and Food Processing Equipment, HVAC, Specialty Vehicles, Medical, Marine, Washing Equipment, or any Industrial Application, let JHF provide it.
Our cooperation cargo and the payment
24 hours services
Questions of customer
1: How soon can we get a sample of the sensing switch?
A : We have usual models(float switches in stock,it can be sent to you within 1-2 working days. and the order depend on how many pis you need.let us discuss it.
2: What is the payment terms?
A :We can accept T/T and L/C at sight payment.
3: Can the logo or company name or the pattern to be printed on the products or package?
A : Sure.Your ogo or company name or pattern can be printed on your products or package by printing,etching,or sticker,
4: Can we choose colr of the product?
A : Yes,please discuss with us.
5: Can package be change?
A : We have professional designer that can help you to design beautiful product
package for your product.
6: Can you help us to develope our own product?
A : OEM r oject is wecome, we have professional workshop for doing OEM project.
7: How can you guarantee quality of your product?
A : Quality is our life!And the level sensor are stable and reliable.
For every product, we have passed more than one hundredtime of inspection, because QC checking on each production process
8: MOQ?
A :Usually for the special order (OEM) 100pcs is the least ,but for the usually products you can choose any piece,but we can also talk in detail.