Product Details

Specifications

RO water purifier
input power:18W
water output:11.8L/H
source water pressure:0.1-0.3MPA
temperature:5-40 centigrade

Product Description

50/75 gallon RO water purifierThis kind filtration system can completely remove the rust, silt / sediments, suspend solids,

residual chlorine, Hichlon, methane, farm chemicals, organic pollotants, heavy metals, virus,

bacterium, etc in water, Only retaining water molecule and Dissolved Oxygen, and making

water pure and fresher for safe drinking.

Specification

Model	RO-IS
Voltage	AC 220V 50HZ
Power Rating	28.8W
Suitable Water Pressure	0.1MPa~0.35MPa
Operating Pressure	0.4MPa~0.6MPa
Inlet Temperature	5-38℃
Maximum Inlet Water TDS Value	≤1000PPM
Maximum Daily Water Production Volume	50 Gallons, approximately 189Liters 75 Gallons, approximately 283 Liters
Flushing Method	Auto flush
Electric Shock Protection Type	TypeⅡ
Suitable Water Quality	Municipal tap water meeting the GB5749-2006 standards

Five Stages: PP+UDF+CTO+RO+T33

level	cartridge name	Cartridge function
first stage	PP Filter	Removing sand, rust, mud, sediment in water
second stage	Granular Active Carbon Filtration	Removing bad smell & filtering organic sediment
third stage	Block Active Carbon Filtration	Adsorption of the Sunda deep color, flavor Sunda, halogenated hydrocarbons andother organic substanceshazardous to health
forth stage	RO Membrane Filtration	Removing germ, virus, corposcule, other solute & chemicals
fifth stage	In-line Post active Carbon filtration	Adjusting & improving water taste

Water route map

Packaging & Shipping

Packing List• Main machine (including RO membrane) • Storage tank • 6mm water pipe • Installation and User Guide (including certification, warranty) • Gooseneck faucet • Filter cartridge wrench • Accessory pack • Membrane shell wrench

Company Information

Fairs:

If you have any questions,please contract me :

Warmly welcome your coming! We are in panyu guangzhou china. Website :.....Contact me by below ways: * Hot-line: 86-13538724001 * Skype : Jakchan86 *QQ :860005188. Jak will be very happy to answer your questions in 24 hours.

FAQ

Failure Experienced

Reason

Resolution Method

The machine will not start

l The power source is not connected

l Check the power source or

the power source plug

l Low inlet water pressure or no water

l Check the inlet water pressure

l Low -pressure switch failure,cannot

connect the power source

l After connecting the inlet water,

measure the resistance, replace

l High-pressure switch cannot be restored

l After letting off the pressure ,

measure the resistance, replace

l Transformer is burned out

l Measure the output voltage,replace

The high pressure pump

is working properly,but no

water is being produced

l High-pressure pump has lost pressure

l Measure the water pump pressure, replace

l Inlet water solenoid valve is faulty,

no water can get in(no pure water)

l Replace the solenoid valve

l A pre-filter is blocked

l Observe the pure water and waste

water, replace the pre-filter

l Flushing solenoid valve is faulty,cannot

effectively close(stays in a state of

flushing, lots of waste water)

l Measure waste water flow,

replace the flushing solenoid valve

l Non return valve is blocked

(waste water,no pure water)

l Replace the non return valve

l The RO Membrane is plugged

l Clean or replace the RO Membrane

The storage tank is full butno

pure water is flowing out

l Storage tank doesn’t have enough pressure

l Inflate the storage bucket,

empty tank pressure should

be between 0.05 and 0.07MPa

l Post-activated carbon filter is plugged

l Replace the post-activated carbon filter

l High pressure pump pressure is not reaching

0.3MPa, the storage tank internal pressure

cannot reach the set high pressure

l Measure the pressure from the

waterpressure pump,replace

The machine is turned

off but waste water

has not stopped

l Inlet solenoid valve failed; cannot effectively

cut off the water supply

l Observe the waste water,

replace the inlet solenoid valve

l Non return valve has lost pressure

(small waste water flow rate)

l Replace the non return valve

After the machine is filled 'with water,the machine

starts repeatedly

l Non return valve has lost pressure

l Replace the non return valve

l High-pressure switch failure

l Replace the high pressure switch

l System is exhibiting a loss of pressure

l After checking the non return

valve ,check whether there is

water leakage in the pipelines

The pure water flow is

small or not flowing

l Pre-filter is plugged

l Replace the pre-filter

l RO membrane is plugged

l Wash or replace the RO membrane

l Inlet solenoid valve is plugged

l Replace the inlet solenoid valve

l Non return valve is plugged

l Replace the non return valve

l Post-carbon filter is plugged

l Replace the post-carbon filter

l High pressure pump pressure is not enough

l Measure the high pressure

pump water pressure, replace

After-sales service

1.The warranty is valid from the date of the installation.

2.Warranty period: One-year machine warranty. The warranty does not include consumables

(consumables include filters, RO membrane, and storage tanks).

3.Please keep the warranty in a safe place, for maintenance you must have your purchase

invoice, only then is the warranty effective.

4.No invoice , altered machine number, the user replacing parts or modifying the water purifier

on their own,the user not following the requirements of the user manual, and manmade damage do not fall under the scope of the warranty.

5.If your water purifier exhibits abnormal behavior, please immediately turn off the water

source, cut off the power, and contact your local vendor.