Specifications

10A wind turbine mppt charge controller
1. Waterproof class: IP67
2.Integration of co

10A wind turbine mppt charge controller

10A mppt charge controller Features: 

1. High-Efficiency MPPT function (Efficiency≥99.9%)

 

2. Integration of constant Current driver which can drive 100W (200W/24V) LED.

3. LED Driver start to drive LED with different current in different time phase.

4. Battery capacity management function

When battery capacity discharge to the set value, LED driver will reduce driving current. In order to delay LED lighting time. In addition, it will make battery work in the Shallow discharge state.

5. Charge function

It is three phase time charge battery, which contains MPPT charge, constant voltage charge and float charge.

6. Flexible parameter set by Wireless infrared communication.

7. Efficiency of charger and constant current driver is up to 96% by Synchronous rectification.

8. Protect function

Battery reverse connection protection;Battery under voltage protection;The solar panel reverse connection protection;To prevent the battery discharge to the solar panel;The LED output short circuit and open circuit protection.

9. Ingress protection: IP67.

10. Controller is no Aluminum electrolytic capacitor Design, extra long life extending to 25years.

wind mppt charge controller Application Chart:

wind turbine mppt charge controller Environments:

(1) Thecontrollersupports monocrystalline silicon, polycrystalline silicon and thin film solar panels.

(2) ThecontrollersupportsLead acid battery.

(3) Thecontrollersupports LED light.

10A mppt charge controller Specification:

Item		12V system	24V system	Unit
Battery management	Max. charge current	10		A
	under voltage protection	10.8	21.6	V
	Exit the under voltage protection	11.4	22.8	V
	Constant voltage charge	14.4	28.8	V
	Constant voltage floating charge	13.8	27.6	V
	Capacity management voltage	12	24	V
	Tem. compensation coefficient	-4mV/°C/2V		-
Solar panel parameters	PV open voltage	≤55		V
	PV short current	≤15		A
	Optimal work voltage	≥18	≥36	V
LED Driver parameters	driving current	600~6000		mA
	driving voltage	16~60V	32V~60V	V
	Max. driving power	100		W

wind mppt charge controller Mechanical parameters:

10A mppt charge controller Ordering Code:

10A wind turbine mppt charge controller