5L Oil HDPE Bottle Blow Moulding Machine
USD $20,000 - $50,000 /Set
Min.Order:1 Set
Zhangjiagang Shen Zhou Machinery Co., Ltd.
HDPE Bottle Blow Moulding Machine
Features of this Blow Molding Machine:
1) Japan PLC
2) Imported HMI
3) PLC automatic temperature control model
4) Imported electronic parts
5) Japan hydraulic valve, seal and proportional control
6) Hard gear surface decelerator +Japan inverter
7) Double station + High-precision guide +Large arm cylinder axle
8) Central-incoming extrusion die with special steel
HDPE Bottle Blow Moulding Machine workshop
Extrusion Blow Molding Machine Specification
Basic Parameter | |
Applicable Material | PE, PP.... |
Max. Product Volume | Single die head:5L |
Dry Cycle | 1100 pcs/h |
Machine Size (L×W×H) | 2.9×1.8×2.6 (M) |
Machine Weight | 5.8T |
Total Power | 38KW |
Power Consumption | 16KW/H |
Plasticizing System | |
Specification | good plasticizing capability, high output, transducer adjust speed, collect temperature-control signals to prevent the screw from cold starting |
Speed Reducer | hard-teeth, low noise & wear-resistant speed reducer |
Machine Barrel Screw | 60mm,L/D=24, 38CrMoALA high quality nitrogen steel |
Plasticizing | 70Kg/H |
Heating Zone | 3 Zone Casting, aluminum heater |
Heating Power | 6.5KW |
Extrusion Motor | three phase asynchronism motor (380V,50HZ),15KW |
Automatic LiftingSystem | 4 turbos with same height lifting |
Cooling fan | 3 zones 85W |
Extruction System | |
Specification | Continuous die head |
Die Head | 38CrMoALA high quality nitrogen steel |
Max. Dia. of Die Head | Single die head:140mm double die head: 90mm |
Heating Zone | 3 zone heat coil of stainless steel |
Central distance of die head | --- |
Heating Power | 2.5 KW |
Die Heat Huff | Pressure and capacity can be adjusted |
Preform Adjustment | Automatic |
Heat insulation | By heat insulating board between accumulator and hydraulic cylinder |
Open and Clamping System | |
Specification | Gear wheel and rack in-phaseaim at twin shaft clamping device, and cylinder |
Clamping Force | 65KN |
Mold Move Stroke | 158~518mm |
Max. Mold Platen | W×H:320×380mm, |
Max Mold Dimension | W×H×T: 380×400mm |
ElectricControl System | |
Specification | Standard PLC and colorful touch screen for blow molding machine |
Touch Screen | Colorful touch screen, auto alarm, diagnose thesystem |
Temperature Control | Self-regulation |
Temperature Module | Taiwan I-7018RP automatic temperature module, digital |
Action control | Japan Mitsubishi, programmable |
Protection Function | Automatic alert and breakdown feedback double protection of mechanical apparatus |
Hydraulic System | |
Specification | Proportion pressure controller changing direction quickly and softly |
Oil pump motor | three phase a synchronism (380V,50HZ),7.5KW |
Hydraulic pump | Vane pump |
Hydraulic valve | imported hydraulic components—YUKEN |
System pressure | 100kg/CM2 |
Pipes | Bilayer high pressure blast pipes |
Cooling Mode | Water cool and oil cooler separately |
Pneumatic System | |
Specification | imported famous brand pneumatic pressure |
Air Pressure | 0.6Mpa |
Air Consumption | 0.8M3/min |
Valve | TAIWAI AIRTAC |
Cooling System | |
Specification | mold,barrel,oil box adopt independent cooling waterway |
Cooling Medium | water |
Water Consumption | 40L/min |
Water Pressure | 0.2-0.6MPa |
For More Details, please contact us directly, you are highly welcomed!