Specifications
plastic bus chairfunction is great
1 year warranty
overseas service available
plastic bus chair
Extrusion system can be applicable to various of raw material, plasticizing capability must be perfect and output with high performance, transducer adjust speed, collect temperature-control signals and prevent the screw from cold starting
Power driven by AC motor & transfer the power by reducer.
Reducer feature: hard-teeth, low noise and wear-resistant speed reducer. Lubricated by gear oil HD-140.
Heating zone was controlled by 4 zones
Technical Parameters: ( ABLB75Ⅱ)
Max. Product volume | 7.5 liters |
Output capacity | 150~180pc/h |
Screw diameter | 75mm |
Screw L/D ratio | 24 L/D |
Screw drive power | 22 KW |
Screw heating capacity | 7 KW |
No.of heating zone | 4 zones |
Output of HDPE | 100KG/H |
Oil pump drive power | 11 KW |
Clamping force | 78KN |
Max.size of mold | 148-568mm |
Mold stroke | 400 X 450mm |
Max.die diameter | 160mm |
Blowing pressure | 0.6 mpa |
Air Volume | 0.8 M³/MIN |
Cooling water pressure | 0.3mpa |
Water consumption | 80 L/MIN |
Size of Machine | 3.8x2.2x2.8m |
Weight of machine | 8 ton |
Temperature Controller | TAIWAN YANHUA PID |
Auxiliary Relay | OMRON |
contactor | Schneider from France |
Electric motor | Three phase 220V or 380V |
Power Source | TAIWANMEANWELL |
Inverter | DELTA |
hydraulic parts | |
Name | Trader |
Oil pump | TAIWAN HIGH-TECH |
Valve | JAPAN YUKEN |
Oil pump and connection | JAPAN YUKEN |
Sealed part | HALLITE |
air control system | |
Name | Trader |
Cylinder | AIRTAC |
Air Valve | AIRTAC |
more information feel free to contact us in emails,.