Specifications

toilet paper manufacturing machine
it is full automatic toilet paper production line.

D:CDH-1575 YD-E toilet paper manufacturing machine 

 

This full auto toilet paper machine contains three parts as following:

Main Technical Parameter(CDH-1575YE)
Finished Roll Diameter	Φ70-140 mm (Degree of tightness adjustable)
Finished Roll Core Diameter	Φ 20-50 mm
Raw Material Diameter:	≤Φ 1100 mm (Ot,her sizes are available )
Raw Material Core Diameter:	3(76.2 mm) (Other sizes are available )
Perforating Pitch:	90~160mm (Pneumatically separating unit-Optional)
Speed:	180-200 meters/min
Parameter Setting:	Touch button LCD Screen operation panel
Programme Controller:	MITSUBSHI Programmable Controller (PLC)
Mechanism Driving:	Stepless gear box, insure the precision of finished product length
Embossing Roller:	Two sets of Steel to rubber
Unwinding Paper Stand:	3 ply
Pneumatic System 3 HP air compressor, mini pressure 5kg/cm2 Pa(Provided by client)
Power:	Variable frequency speed control, 7.5KW
Machine Size:	6200×4200×1800mm(L×W×H)
Weight:	6800kg

Main Technical Parameter(CDH-150)
Log Length:	1500mm~2700mm
Log Outside diameter:	90mm-150mm (standard size:110±5mm)
Cutting length:	variable
Machine speed:	160cuts/min, 2 rolls /cut
Operation speed:	150cuts/min, 2 rolls /cut
Blade outside diameter:	610mm
Installed power:	Alternating Current:5 Horses per Machine
Frequency Conversion:	5 Horses per Machine
Alternating Current:	1/2 Horses per Machine, AC motor 5 Horses

Main Technical Parameter(CDH-90)
Center Distance:	192mm
Packing Speed:	35~120 bags/min
Max Film Width:	450mm
Finished Bag Size:	L: 150~250mm  W: 140mm
Max Height:	120mm
General Power:	3.2kw
Motor Power:	0.75, 0.2 kw
Machine Net Weight:	900 kg
Machine Noise:	≤78db
Pass Percent For Finished Bag ( Percentage):	≥97%
Sealing pressure:	15 newton/mm
Outsize Dimension For Machine:	4432×1115×1750mm
Type Of Power Supply:	380V 50HZ
Packing Film:	OPP, PE, PVC, OPP/CPP, PT/PE

Main features:
1.Automatic core loading and replacing. The logs are automatically pushed out after finishing winding, and then start winding again. The cores can be adjusted to any size of cores within one minute.
2.After finished winding the roller pushed out automatically. Its adopt machanism arm pusher to push the roller out. The minimum diameter of finished roll is 60mm.
3.Automatic trimming, gluing and sealing: it has replaced the traditional sealing of rolls with the international popular trimming and sealing, which can have 10-18mm tails to facilitate to start pulling out the paper. At the same time, it can greatly cut down the wastage of the paper, thus to cut down the production cost.
4.Advanced PLC programmable control technology: the winding profiles can be tight at the beginning of winding, and then getting loose, to avoid the problems that the cores are loose from the rolls after long time storage.
5.Automatic detection of paper break and paper wrap up: to guarantee the high quality of the finished rolls even in the high speed operation.
6.Coreless rewinding system has changed the traditional mathod to take out the core to make with quality solid coreless roller. Reducing the manpower.
7.With high precision screwy perforation knife. With 4 perforation blades to make clear perforating. The perforating pitch controlled by gear box.
8.Three backstands, pneumatic jumbo roll loading, and pneumatically wide belt paper unwinding driving, and individual web tension control unit for each jumbo roll.
9.Point to point embossing unit: the paper are embossed on both sides and feel softer. It make embossing more clearer and better. The finished rolls compared to the same diameter rolls with less paper
10.The web can be threaded on the machine by the two jog buttons. Its more safety and easier to feed the web..