48V 6000W Power Frequency Pure Sine Inverter for communications
Negotiable /Set
Min.Order:5 Sets
Guangdong Kingwood Electronic Co., Ltd.
48V 5000W Power Frequency Pure Sine Inverter for communications
48V 3000W Power Frequency Pure Sine Inverter for communications
48V 1200W Power Frequency Pure Sine Inverter for communications
48V 1000W Power Frequency Pure Sine Inverter for communications
Hid light bulbs for Audi Bmw Benz Porsche low beam with canbus ballast
48V Power Frequency Pure Sine Inverter for Communications
Introduction:
KINGWOOD Pure Sine Wave Inverter / Power Inverter / Inverter Power Supply uses the American INTEL 16 digits micro-processor control. The main circuit used the imported power modules. With the strongpoints such as high reliability, perfect protection function, low waveform distortion and lower price, etc. The inverter has high invert efficiency (in the condition of full load, the invert efficiency can be up to 85%). At the same time, this inverter have strong non liner load driving capability. Besides, the Inverter can control the monitor the input voltage/current, output voltage/current. Inverter can realize the function of unattended operation.
H Series (48V) of Pure Sine Wave Inverter / Power Inverter / Inverter Power Supply specially designed for the communication. This Inverter is mainly used in SPC, computer center, network, billing servers and accident lighting, etc.
Features:
Output overload protection/ Input reverse connection protection / Output over voltage protection
Input under voltage protection / Output short circuit protection / Input over voltage protection
Technical Parameters:
Technical Index | DA-5000H | DA-6000H | |
DC Input | Rated Voltage | 48 Vdc | |
Rated Current | 98 A | 118 A | |
Voltage Range | 40 ~ 60 Vdc | ||
Current without load | 2.2 A | 2.4A | |
Ripple Noise | ≤3% | ||
Ripple Noise Reverse | ≤1% | ||
AC Output | Rated Capacity | 5000 VA | 6000 VA |
Rated Power | 4000 W | 4800 W | |
Rated Voltage and Frequency | 220Vac, 50Hz | ||
Rated Current | 102 A | 125 A | |
Voltage Accuracy | 220 V± 3% | ||
Frequency Accuracy | 50 Hz ± 0.5 | ||
Waveform Distortion (THD) (linear load) | ≤3% | ||
Dynamic Response (load 0 - 100%) | 5% | ||
Overload Capacity | 150% 10s | ||
Inver Efficiency (80% resistive load) | ≥80% | ||
Bypass Conversion Time | ≤10 ms | ||
Environment | Insulation Strength Vac (input-output, input-shell, output-shell) | 1500 | |
Noise (1 m) | ≤45dB | ||
Environment Temperature | 0 ~ +40 °C | ||
Humidity | ≤90% (20°C±5°C) | ||
Altitude | ≤1000 m | ||
Dimension (mm) | Table type (D×W×H) | 380×180×246mm | |
Rack-mounted (D×W×H) | 340×480×150mm | ||
Weight | 85 Kg | 90 Kg | |
Protection | Output Overload | Close after 10s when the load power is more than 150% | |
Output Short-circuit | Device will close automatically | ||
Output Overvoltage | Ac>245±2V, device will close automatically | ||
Input Reverse | Device will close automatically | ||
Input Undervoltage | Dc<40±1V, device will close automatically | ||
Input Overvoltage | Dc>60±1V, device will close automatically |