fue oil resistant 2 inch flexible braided teflon hose pipe

DESCRIPTION:                                                                                                                

PTFE hoses are widely used throughout the Pharmaceutical, Dairy and Food Industries and can offer working conditions up to 2000 PSI and 260 degrees centigrade (although not together). Each Hose can be produced with either a smooth or convoluted inner bore.  As with stainless steel convoluted hoses, a stainless steel outer braid is standard to increase the pressure rating. Wire helix can also be incorporated into the design for use on vacuum systems. 

CONSTRUCTION:                                                                                                            

FEATURES:                                                                                                                        

1. high chemical stability.it can withstand all of the acid, including the role of aqua regia , hydrofluoric acid, concentrated hydrochloric acid , nitric acid , fuming sulfuric acid , organic acids , alkalis, strong oxidants , reducing agents and various organic solvents. Ideal for high -purity chemicals feed use .

2. low coefficient of friction. the friction coefficients is just only 0.04 and it won't change as the temperature changing.

3. great anti-adhesive, easy to adhere to the inner wall of colloid and chemicals.

4. excellent resistance to aging, long-term outdoor use.

5. excellent electrical insulation properties. ptfe is a great nonpolar materials, having good dielectric properties, and the dielectric constant is the minimun in all electrically insulating material, just only 2.0.

6. great  transparent of high quality ptfe tube can be easily observe the internal flow conditions.

APPLICATION:                                                                                                         

INSTALLATION GUIDE:                                                                                           

1. Avoid torque.

Do not twist the hose assembly during installation when aligning the bolt holes in a flange or in mating up pipe threads. The utilization of lap joint flanges or pipe unions will minimize this condition. It is recommended that two wrenches be used in making the union connection: one to prevent the hose from twisting and the other to tighten the coupling.

2. Prevent out-of-plane flexing in an installation.

Always install the hose so that the flexing takes place in only one plane--this being the plane in which the bending occurs.

3. Avoid over bending.

The repetitive bending of a hose to a radius smaller than the radius listed in the specification tables for corrugated hose will result in early hose will result in early hose failure. Always provide sufficient length to prevent overbending and to eliminate strain on the hose.

4. Avoid careless handling of the hose assembly.

. Always lift or carry metal hose to prevent abrasion damage particularly to braided corrugated hose. Store metal hose assemblies away from areas where it can be subjected to spillage, corrosive fumes or sprays, weld splatter, etc.

5. Always support the piping.

A piping system which utilizes metal hose to absorb movement must be properly anchored and / or guided. Always support the piping to prevent excessive weight from compressing the hose and relaxing the braid tension.

• Hongchang Jufa Co., Ltd is a factory, specialzied in manufacturing rotary joint, flexible metal hose, expansion joints and hydrualic rubber hose.

• We have a series of production flow to make the product ensuring high quality to each customer.

• Whatever from design to packing, every step, we have a professional team to control.

FINISH PRODUCTS:                                                                                                

HOW TO ORDER                                                                                                   

To properly design a metal hose assembly for a particular application, the following design parameters must be determinde:

1. Temperature. You should provide us information as the temperature to which the assembly is exposed a

proper fit.

2. Size. The diameter of the connections in which the assembly will be installed is needed to provide.

3. Media.  This is improtant since you must be sure that the assembly's components are chemically

compatible with the media going through the hose as well as the environment in which the hose is installed.

4. Pressure.  identify the internal pressure to which the assembly will be exposed. This information is

important to determine if the assembly is strong enough for the application.

5. Indenify the necessary end fittings. This is required since fittings for the assembly must be chosen to

properly fit the mating connection.

Shipping:

1. FedEx/DHL/UPS/TNT for samples, Door-to-Door.

2. By air or by sear for batch goods, for FCL; Airport/port receiving.

3. Customers specifying freight forwarders or negotiable shipping methods!

4. Delivery Time: 3-7 days for samples; 5-25 days for batch goods

In according to the goods you ordered, we will choose the best way to delivery, keep your project going and

save your money.

Foshan Nanhai Hongchang Jufa Electromechanical Valve Co., Ltd is a factory set up in 2006. We

are specialized in researching, developing and manufacturing different kinds of rotary joint,

flexible metal hose, rubber hose, bellow expansion joint and valve equipment in China.

Our factory is covering over 10,000 square meters. Our R&D department consists of 3 engineers.

Also, we have experienced QC personnel to check all our products strictly before packing. All of

our products met the national standards and have pass ISO9001 certification. We obtain trust

from customers by advanced technology, excellt quality and satisfactory service. Also, we

specialized in customized rotary joints tailored to meet your project requirements.

Our mission is: Offer high-quality goods, excellent service, and reasonable price to customers; Use our

product, you will get more benefits!

1. How about the Hongchang Jufa Co., Ltd?

       Hongchang Jufa Co., Ltd  is a factory, specialized in manufacturing machinery parts, such as rotary joints, flexible metal hose, expansion joints and hydrualic rubber hose.

2. How about your products?

      Quantity is our Culture!!!  Our main products include rotary joints, flexible metal hose, expansion joints and hydraulic hose. Each products should be test seriously before delivery.  Also we have a good cooperating relastionship with other factory who specialized in manufacturing pipe fittings.

3. How about the Minimum Order Quantity?

      Our Minimum Order Quantity is 1 meter!!!

4. Can I get a Sample?

     Yes! We will provide sample to every customer before making a large order. Also, the sample is not free and the freight would be paid by you.

5. How about the Payment?

    Normally 30% deposit in advance, the balance should be paid before shipment.

    T/T, wester union and Paypal is common payment term.

6.  How about the Delivery Time?

        If your order is in common size, we could send it with 3 days!!!  But if your order in special size or material, it would be depend on the production time.

7.  Could I custom the Products?

      Yes!  Please send us your drawing or the basic information.

Question? Inquiry? Please leave messages in the below or click the supplier on the right table, we will reply you as soon as possible with 1 hours!!!