Product Details

stage led street light solar charge controller with USB&DC 15A (CMTP01-DU15A)

Light and timer control (Single timer and dual timer optional)

Ideal for public lighting area, such as street light, path way, garden lights, parking area,bus station etc.

Current: 5A/10A/15A/20A

Voltage: 12/24V auto work

Summarize

LC series solar charge controller adopts the most advanced digital technique and operates automatically.

The Pulse Width Modulation (PWM) battery charging can greatly increase the lifetime of battery.

Application:

Ideal for off-grid solar lighting system that needs light and timer control

Solar street light system

Solar garden light system

Solar billboard

Solar detection equipment etc.

Advantage:

Intelligent System Optimum Control
High efficient Series PWM charging with temperature compensation
Compact size
Use MOSFET as electronic switch, without any mechanical switch
Digital LED menu, only one key choose the battery type
Load status display
Gel, Sealed and Flooded battery type option
Big terminals and big distance between terminals
Electronic protection: Overheating, over charging, over discharging, overload, and short circuit
Reverse polarity protection: Any combination of solar module and battery
In-build high accuracy constant current (LED Driver), with 91%-96% output efficiency
High efficiency series PWM charging
Over-load, Load short-circuit, PV/battery reverse polarity protection, ect.
A setting button to set adjustable lighting control option
Full power timer, Second timer, Third timer, hours to dawn timer are option with different output power
With self-dimming capability basing on battery voltage to save energy and realize lamps turn on for 365days.
Special for LESS THAN 70W Solar LED Street Lights

Electronic Protections:
·Overheating
·Over discharging
·Over charging
·Load overload
·Load short circuit
·PV reverse polarity
·Battery reverse polarity

Temperature Compensation Coefficient

Description	Parameter
Temperature Compensation Coefficient(TEMPCO)*	-30mV/°C/12V(25°C ref)

* Compensation of equalize, boost, float and boost reconnect voltage

Features:

Electronic protection

Fully automatic operation

PWM charge mode (SOC)

Micro-controller digital accuracy

Suitable for all 12/24V DC lamps

Big terminals, big distance between terminals

Double digital LED display, numbers equal to timer setting

Temperature compensation (with external temperature sensor)

Indicator LED:

1. Charger LED is used to indicate the charging status of battery, LED turn off means charging stopped.

2. Battery Status indicator: RED ON when battery under voltage, please charging, GREEN ON when the battery full.

3. There is output and load can work if the Load LED is lighting. There isn’t output and the load can work is the Load LED off.

Notice:

1. Please carefully check and confirm the voltage before wiring the components of the solar panel voltage is 18V, battery 12V, 12V rated voltage of the load.

2. The rated current of solar panels and load must be less than the rated current of controller.

The specification: Error of 2%

Rated voltage	12V
Voltage of stop power supply	10.5V
Voltage of recover power supply	10.5V	DC output voltage	10.5-14.5V
Charging stop voltage	14.4V	DC output current	1.5A
Rated of the charging current	3.5/10/20/30/50/60/80/100A	Working temperature	-20 ~ +60°C
Rated load current	3.5/10/20/30/50/60/80/100A

*USB, DC parameters only for some models.

Parameters may customized by customers.

CMTP01 series solar charge controller is a specially for the sunshine of the good development of a region and a separate simplified controller Suitable for 12V automatic control system, and some models with USB5V / DC12V output, to facilitate the use of smart devices and lighting.

1. Function:

Over-load protection

Short circuit protection

Reverse discharging protection

Reverse polarity protection

Protection from the lighting strike

Under-voltage protection

Over-charging protection

2. Connection ( As indicated in diagram ):

Open the top cover of controller and connect the wire with terminals follow the diagram on the top cover of it.

1. Connection the “+”, “-” Poles of the battery to the corresponding ports of controller ( the third and the fourth one from left ).

* The subsequent operation can be processed only if the load indicator ( mark: load ) flickers once and starts lighting after 30 seconds.