Product Details

lathe turning tools

Carbide Metal Lathe Turning Tools

Enquiring Now for Free Samples

MACFSSC Principle

MACFSSC Principle for Inserts Selection

It is particular important for the selection of cnc machine tools. Due to the various brands and models of machine tools in the market, are you troubled by choosing the right ones. Selecting suitable tools can not only improve machining precision, reduce the defective goods and extend the service life of cutters, but also greatly reduce the cost of tools. Come and choose the most suitable tools right now!

And Here comes the MACFSSC principle of seven points that should be concerned in choosing inserts:

Tool selection is very complex, so free consulting immediately to Datan professional tool engineer......

Mail: slash(at)

Skype: slashchen007

Tell: +86 159 6241 0804

Geometry Features

Geometry Features of Carbide Metal Lathe Turning Tools

1. Without chip breaker.
2. Flat-top.
3. Stable placement.
4. Strong edge design for intermittent cutting conditions.

Grade of Application

WNMA Carbide Metal Lathe Turning Tools Grade Application

Grade

Cutting Range

Coating

Advantage

KEA31

Finishing and
Semi-finishing

1. MT-TiCN and thick Al2O3 coated on

micro-grain carbide substrate, superior

wear resistance. Special postprocessing

with smooth coating and shows superior

wear resistance and fracture resistance.
2. Application: Suitable for nodular iron and

gray iron in continuous and light interrupted

conditions.

KEA51

Semi-finishing
and Roughing

1. Thick MT-TiCN+Al2O3 coated on toughness

micro-grain carbide substrate,keeping superior

wear resistance and greatly improved toughness.
2. Application:Suitable for bad machining

conditions which require high toughness.

WNMA, Trigon 80°, with Hole

Ordering Code	Dimensions(mm)
	L	D	S	d1	R
WNMG060404	6.5	9.525	4.76	3.81	0.4
WNMG060408	6.5	9.525	4.76	3.81	0.8
WNMG080404	8.7	12.7	4.76	5.16	0.4
WNMG080408	8.7	12.7	4.76	5.16	0.8
WNMG080412	8.7	12.7	4.76	5.16	1.2
WNMG080416	8.7	12.7	4.76	5.16	1.6

Selection Method

Two Simple Ways of Inserts Selection

Step 1, According to shapes of inserts——

Pls click the blue underline words for checking

80° Rhombic 55° Rhombic 90° Square

60° Triangle 35° Rhombic 80° Trigon

Step 2, Accoding to grades of inserts——

Note: Pls check each blue underlined works to check

FQ for finishing of MQ for semi-finishing of MS for medium cutting of KU for

general steel and alloy steel general steel and alloy steel stainless steel and mild steel machining cast iron

KH for cast iron cutting Flat-top for intermittent PG for light cutting of general steel

and heavy cutting cutting conditions alloy steel, stainless steel, cast iron

Six Big Advantage

High Cost Effective, Better Price, WHY US!

Our tool performance can up to Japan and South Korea level, some even to Europe level;
With the same performance, our price is much lower than high-end brand;
50 Years experience that can provide you with highly efficient machining program;
Offering professional guidence in cutting tool choosing;
One-stop sourcing of cutting tool;
Chinese most authoritative cnc cutting tool web for tool choosing, the web is highly regarded by industry association.