Specifications

Short Cycle Laminating Press
1. Pressure control
2. Temperature recycling system.
3. Thermal oil or steam as heating medium.

XXL Short Cycle Laminating Press is mainly appiled in the lamination of furniture decorative board and laminate flooring.We provide customers with various overlaying production lines according to their specirements. At present three are basic types:

 

XXl-E economical type overlaying production line

XXL-S standard type overlaying production line

XXL-A automatic type overlaying production line

 

1. Finished board size……………………………………….……..1830×2450mm
2. Pressing cycle…………………………...According to technological requirement
3. Raw board size………………………………………….(3-40)×1830×2450mm
4. Total power………………………………………………………………...~65kW
5. Thermal consumption…………………………………..0.35MW(30×10⁴ kcal/h)
6. Compressed air consumption……………………………..…~0.8m³/min 0.6Mpa (User prepares compressed air)
7. Total pressure……………………………………………………………15000kN
8. Hot platen size……………………………………..……………..2000×2600mm
9. Daylight opening…………………………………………………………300mm
10. Specification of main cylinder……………………………………360×300mm
11. Specification of lifting cylinder…………………………………140×300mm
12. MAX. Pressure of hydraulic system……………………………………≤25Mpa
13. Temperature control mode………………………………. Temperature controller

                                 (Recycling temperature control system included)

14. Heating medium…………………...…………..Thermal oil (User prepares boiler)

15. Control mode………………………………………Man-machine interface + PLC

16. Net weight…………………………………………….……………….~95000kg

17. Blowing rate of dust collector………~4000m³/h (dust collector prepared by user self)

18. Overall dimension………………………………………..32000×7500×5100mm