X-ray rediation protective lead glass

 1.The radiation-proof lead glass is a kind of brittle materials. Having the heavy specific gravity, it should be taken carefully during the course of movement.

2.When the lead glass is fixed to the window, the surroundings of the window should be sealed up by lead boards or by lead rubber to prevent the ray’s leaking from there.

3.When fixing the radiation-proof lead glass, the damp timbers should not be used for the window frames. Because when the timbers shrink, the lead glass would be damaged.

4.The surface of the radiation-proof lead glass should not touch or rub with the hard or rough objects to prevent the marks emergence.

5.The radiation-proof lead glass should be used and stored in the dry and ventilation areas. It should not be washed and cleaned by water, or else there will appear some speckle. If it has already appeared some speckle. we can use absorbed cotton with ethanol to wipe it.

6.Because the glass has weak stability, we should keep it away from these chemicals, such as paint, thinner. If they contact each other, the glass can easily be oxidized. In the short time, we can use the ethanol to clean it. If it does not work, please contact our company.

Specification for Lead Glass as below for reference :

1. 1500X 1000 X 20mm

2. 1500X 900  X 20mm

3. 1200X 900 X 20mm

4. 1200X800 X 20mm

5. 1200X 600 X 20mm

6. 1000X 800 X 20mm

7. 900 X600 X 20mm

8. 800 X600 X 20mm

9. 700 X500 X 20mm

10. 600 X 400X 20mm

11. 600 X 400X 12mm

We have many sizes for your choice

Remark : The lead quantity of glass is more than 2 mmPb every 20mm deep, we can work according to the buyer's requirement.

We also can make the sizes according to your detail requirements.