Specifications
Adhesive for shoes making(upper and hole)Echo friendly
Reasonable cost
Good quality
Adhesive for shoes making(upper and hole),shoes glue
| Strong Adhesion Glue for Shoes Coating 835A | |
| Application | 835A is designed for shoes coating. |
| Feature | Good initial tack, excellent low temperature performance, excellent anti-aging properties, impermeable, glue will not transfer after lamination, with good bonding strength effect for the non-woven fabric. |
| Appearance | Milky white |
| Viscosity | 1400±300cps @180°C |
| 1800±400cps @170°C | |
| 2500±500cps @160°C | |
| Softening point | 76±4°C |
| Usage guidance | 1. Suggested operation temperature: 160°C-180°C. |
| 2. Suggested tooling method: hot-melt roller or blade coating systems. | |
| 3. Suggested cleaning method: Clean the equipment with mineral oil at 120°C. Then flush it with the same type adhesive below 170°C. | |
| Precautions | 1.The property of glue adhesion will differ from the different surfaces of substrate and thickness of applied adhesive. |
| 2. Material is applied hot-appropriated clothing and eye protection should be used. | |
| 3. Please keep the adhesive below 180°C during operation to keep the lowest danger of flammable volatiles. | |
| 4. During adhesive operation, make sure the air flow and any fire is prohibited. | |
| Package | 1kg/block,each block with a release paper,20kgs in a carton. |
| Storage | 2 years in dry and cool environment below 35°C and far from fire, unexposed to the sunlight. |
