Specifications

Retardant foil insulation be used as a wrap for hot water heaters, pipes,metal and commercial buildings, stud walls,roofing,craw

Fire retardant aluminum foil sandwiched with single & double bubble film heat insulation 

Temp Shield Single Bubble/Double Foil Reflective insulation products are available in 300&500 sq.ft.Rolls.Standard widths are 4',5',8' and 10' are available by special order.

 

TempShield Brand Single  Bubble/Double Foil Reflective insulation has one layer of 1/3" to 1/10" barrier bubble film laminated between two layers of metalized film.                

TempShield® Single Bubble/Double Foil may be used as a wrap for hot water heaters, pipes, metal and commercial buildings, stud walls, roofing systems, basements and crawl spaces.

TempShield® Single Bubble/Double Foil may be used as a vapor retardant and when reflectivity and R-factors are required.

TempShield® Single Bubble/Double Foil can be stapled, glued or taped if necessary, depending on the installation involved.

 

Key Benefits

· Clean, Lightweight, Easy to Install

· Class A / Class 1 Fire Rating

· Saves Energy and Money

· High Thermal R-Values (see Applications on left for specific R-value)

     TempShield® Brand Single Bubble/Double Foil reflective insulation also offers these benefits:

· Non-toxic/Non-carcinogenic

· Installation requires no special tools or clothing

· Does not promote the growth of fungi or bacteria

· Provides no nest support for rodent or insect pests

· Meets fire and smoke safety requirements of most federal, state, and local building codes

· Requires no maintenance

· Puncture and tear resistant

 

 

How Radiant Heat Transfers Through Roofs

 

TempShield® is used as insulation against radiant heat transfer and can be used to its greatest advantage in instances where radiation is the predominant means of heat transfer. It is the bright aluminized film surface of all TempShield® products that gives it its insulating properties. This happens in two ways:

 

TempShield® is an excellent reflector of all long wave radiant heat that strikes it - reflecting up to 95% of all radiant heat.

 

TempShield® will reradiate only 5% of heat in which it comes in close physical contact, compared with the approximate 90% reradiation of ordinary building materials, at the same temperature.

 

 

 

 

Product Specifications
Product Description	One & Two layer of 1/3"to1/10" barrier bubble film sandwiched two layers of reflective aluminum foil or metalized film
Contact Temperature Range	-60°F to 180°F (-51°C to 82°C)
Thickness	1/8 inch nominal
Water Vapor Transmission	.02 perms ASTM E96
Puncture Resistance	60 lbs/in
Pliability	No Cracking
Linear Shrinkage	None
Mold and Mildew	No Growth
Flame Spread	0 ASTM E84-08
Smoke Development	25 ASTM E84-08
Fire Rating	Class A/Class 1

 

Characteristics

 

1.No odor and toxicity,environmentally-friendly
2.Light,soft,dustfree,retardant,easy to install
3.Heat reflection,heat insulation,sound insulation,anti-radiation,anti-vibration,and shielding
4.Moisture,barrier,sun-proof,waterproof,good sealing property,heat preservation,energy saving

5.Summer:moisture barrier,sun-proof,heat insulation,saving energy consumed by cool air conditioning
6.Winter:heat preservation,central heating saving, and remarkable energy-saving effect.

 

Application
1.Used in Roof/Attic/Wall insulation/Crawl Spaces Insulation
2.Used in Under Concrete Barrier&Insulation
3.Used in HVAC Duct Insulation
4.Used in Metal Building Insulation
5.Used in Post Frame Building insulation
6.Used in Water Heater Insulation Blankets or Jackets.
7.Used in Radiant Floor Insulation/ Garage Door Insulation
8.Used in Ultra/Stanard Under Concrete Barrier
9.Used in Duct Wrap Insulation