Product Details

SVR 10

Materials used to produce rubber is auxiliary latex (coagulum latex, bowl latex, braid latex). These latexes are mixed with one another according to a appropriate proportion to create quality products. Specifications of this rubber include Po index, impurities content, plasticity retention index, ash content, volatile matter content, nitrogen content. Difference among materials used to manufacture this rubber require a closer control quality of grades from the latices (SVRL, CV) and a more meticulous blend. Producing block rubber from auxiliary latices must be done through a lot of steps: preliminary cleaning of materials, cutting into small pieces, chopping into smaller pieces (reducing size), drying…

PROCESSING:

Application:

This is a type of rubber produced from coagulum latex, miscellaneous latex and through a skilful process, so the rubber is tough. Therefore, this rubber is mixed with low-grade RSS, CV50 to manufacture very good products.
In addition, it’s possible to combine this rubber with grades of latex to create GP (general purpose) products in order to meet basic requirements of tyre production.

Packaging:

- Block rubber:
     Type of bale:
      + 33.33 kg/bale; 36 bales = 1.20mts/pallet; 16 pallets = 19.20mts/container 20’.
      + 35      kg/ bale; 36 bales= 1.26mts/pallet; 16 pallets = 20.16mts/container 20’.

   Bale size
      + Length   : 670 mm +/-20mm
      + Width    : 330 mm +/-20mm
      + Height   : 170 mm +/-5mm

- PE bag:
+ Thin bag: normal polythene bags or called Normal Poly
Size:
      + Length       : 950mm-1.050mm
      + Width    : 500mm –550mm
      + Thickness     : 0,03mm +/-0,01mm
      + Maximum meltability: 109oC
      + Melting point: 90-960 C
      + Density: 0.92g/cm3
      + Dispersity: compatible with rubber at 1100C

Size:
   + Length      : 950mm-1.050mm
   + Width    : 500mm –550mm
   + Thickness      : 0.10mm +/-0.01mm

Vietnamese Standard: The Specifications of Natural Rubber in Block.

(TCVN 3769:2004)

Approved under the Decision No 61/QD-BKHCN dated January 19^th2005

Of the Ministry of Science and Technology.

Parameter	Grade
Parameter	SVR 3L	SVR 5	SVR 10	SVR 20
- Dirt content (max % wt)	0.03	0.05	0,08	0.16
- Ash content (max % wt)	0.50	0.60	0.60	0.80
- Nitrogen content ( max % wt)	0.60	0.60	0.60	0.60
- Volatile matter (max % wt)	0.80	0.80	0.80	0.80
- Initial plasticity (Po) (min)	35	30	30	30
- Plasticity retention index (PRI) (max)	60	60	50	40
- Lovibond color I index (max) Difference between samples (max).	6 2	- -	- -	- -
- Mooney ML (1’ + 4’) 100^oC - Mooney viscosity ML (1’ + 4’) 100^oC	-	-	-	-

TERM AND CONDITIONS:

Package	33.33 KG OR 35KG / PALET
Delivery time	30 days
Samples	1-2 days after request sample
Sea Port	CAT LAI- HO CHI MINH CITY BY SEA
Payment terms	LC, TT, DP