Product name:

Outdoor mat hiking mat camping mat

Instructions:

1.  Sample time:3-7 working days

2.  Delivery time:20-30 working days upon quantity. 

3.  OEM service is available.

4.  Guests can customize item

Product introduction:

 Product photos:

The size and packing instructions

 

 

The characteristics of this kind of mat:

1. Unique sponge hole design can restore elasticity in a very short time
2. Snap button design, can let each mat splicing

First steps:
1. Open air cushion
2. Open the mouth, make the automatic air cushion bed expansion. Closed gas mouth, the mattress bed is folded over and over again, and then press a few times, hard to open the valve, let the air cushion bed expansion automatically, so that it is completely restore elasticity and shape.

Aeration method:
1. Open air cushion, open the mouth gas, air cushion bed will automatically start to expand.
2. Please wait until the air cushion gas evenly
3. Adjust the air pressure, adjust its hardness and comfortable.

Note:
If long-term under the conditions of the rolled the custody (not recommended), please use mouth blowing a few times expansion to restore its elasticity.

The method of exhaust:
1. Open the mouth, from the mouth, on the other side of the roll up gas, pressure out of the air.
2. Close the gas mouth, by the other side will air cushion bed up, again to open the gas nozzle residual air out.
3. Finally close the valve, at any time can be rolled state preserve.

Please note place outsourcing when carrying bag, avoid to scratch.

The method of storage:
Open air cushion, open the gas mouth, stored in a cool, dry place (example: on a bed or sofa behind, etc.), because of the air cushion bed sponge has shape memory, the most commonly used to quickly expand into state

The method of repair:
1. Confirm the place of leakage: close the valve after blowing expansion, water or diluted soap water to wet surface, fold in half, with the knee down to weight pressure, sparkling place is flat, please make the mark.

2. The small hole repair: will completely dry air cushion bed, leaking air, drops of adhesives on the hole. Because of the air, so agents can be inhaled, the hole will be sealed. Then agent such as after hardening.

3. Great damage repair: air cushion bed dry completely discouraged, glue for fixing the cloth, cushion hole in the bed surface is coated with adhesive, dry 30 seconds to three minutes (depending on the temperature of high and low), joint in lesions, planish, keep 4 hours before use.

Clean:
Will air cushion bed expansion to the maximum limit, tightly close the valve, with soft brush and low stimulation family degreasing detergent or lotion, flush thoroughly with water after washing in the bathtub

 

Company photos