Product Details

Brief introduction

(1) factory direct selling.

(2)Specialing in production of water tank more than 20 years.

(3) Professional engaged in water tank design, production and installation.

(4) food grade sheet molding compound panel.

(5) Deversity of the product: SMC/FRP/GRP water tank, stainless steel wanter tank, hot dip

galvanized water tank, enameled water tank, gush-paint water tank, etc.

(6)Multiple sizes: 1*1m, 1*0.5m, 0.5*0.5m,also can be costomized accroding to costomers

requirement.

(7)Wide application: as the storage equipment for drinking water, reclaimed water and fire

water,water tank has widely used in mining, residential buildings, hotels, office buildings,

schools, restaurants and other public facilities.

(8)water tank's thermal insulation: all kinds of water tank can were the thermal insulation coat to deal with temperature extremes.

(9)Tank of different height uses different bottom panels, side panels and top panels strictly

according to the assemble principle.

(10)The assemble principle guarantees safety coefficient by reasonable saving of materials. It can serve more than 50 years.

Panel physical and chemical function

Project	Performance index
Tensile strength,Mpa	≥60
Bending strength,Mpa	≥100
Bending modulus,Gpa	≥7.0
Pap hardness	≥60
Bibulous rate,%	≤1.0
Glass fiber content,%	≥25

Packaging & Shipping

Careful packing and transportation

STEP-BY-STEP ASSEMBLY

Step 1. Install steel footings on leveled concrete foundations.

Step 2. Align GRP panels to be pre-assembled.
Step 3. Place rubber sealant from ready-to-use roll between panels.
Step 4. Connect panels with bolts and nuts.
Step 5. Position bottom panel sections, and finish up base of tank.
Step 6. Position three sides of the tank.
Step 7. Position and fix roof panels and if required, roof support pipes and plates.
Step 8. Install reinforcement if required.
Step 9. Close up the tank with the fourth side.
Step 10. Finish the internal or external reinforcement.
Step 11. Fill and test.

Our Services

Before-sale services:

(1) Tell customers how to use our products and matters needing attention.

(2) Guide customers to choose the best and economic product, recover the investment within short time.

(3) Site inspection if you need.

In-Sale services:

(1)Quality control must be inspected strictly.

(2)In accordance with the agreements stipulated in the contract.

After-sale services:

(1) If the project needs our installation guidance, we can send our engineer and translator. We can also send customers installation video to teach them how to fix and operate with our product.

(2) Usually, our product warranty is 18 months after leaving factory or 12 months after installation. within this months, all parts broken will be responsible for our factory.

(3) Regular contact with customer, consult with the customer feedback, come true with the customer's two-way communication.