Product Details

Product Description

Molded grating series:

Product overview:

Molding FRP grating is a kind of unsaturated polyester resin as matrix, coarse sand with glass fiber for the skeleton. Woven on the metal mold die and become, or hand made up again after heating the whole forming, product appearance smooth, beautiful appearance, high inner quality, glass fiber content of more than 30% (weight percentage)

Application field:

Chemical, petroleum, metallurgy, electric power, electroplating, batteries, machinery, pharmaceutical, printing and dyeing, mining, sewage treatment, home decoration, municipal engineering, washing room, etc.

specific application:

Operating platform, trench cover, double ground, road, corridor, stair tread, condole top, found board, car washes the floor, etc.

Features:

A variety of chemical corrosion resistance, never rust, use cycle is long, free maintenance.
Flame retardant
Insulation, nonmagnetic
With mild elastic, can reduce fatigue, enhance intimacy, improve work efficiency.
Light weight, high strength, and easy to cut, installation
The color of the inside and outside the uniform can be arbitrary choice. Can according to customer request custom color, improve the environment in the workplace.
Has good comprehensive economic benefit
Can design sex is strong, flexible and varied size.

Pultrusion grille series:

Product overview:

FRP pultrusion grille is adopting FRP pultrusion, "I" shape profile as load-bearing article, tube and rod as connecting rod, such as through the assembly process must be made with a gap of the plate.

Application field:

Water treatment, water supply and drainage, oil chemical, electric power, papermaking, construction, textile, printing and dyeing, ships, etc.

Specific applicable: operating platform, stairs walkways, stairs lifted block, ground level ground, trench cover, walkways, pedestrian overpass, equipment safety bar, scaffolding.

Features: pultrusion with molding FRP FRP gratings most of the features, but also has its significant difference, the most important thing is that in carrying the direction high glass fiber content (65% 70%), so compared with molding glass fiber reinforced plastic grille, apply more superiority under the large span, this would reduce foundation support, reduce the engineering cost.

About the size, we can customize for you!!!

Specification

Item No.	Height(mm)	Mesh Size(mm)	Standard Panel Size (mm)	Open Area	Weight(kg/m2)
1	15	38 × 38	1220 × 3660	72%	6.00
2	15	20 × 20 40 × 40	1247×4047,1007×4047	42%	9.00
3	25	38 ×38	997 × 3050 , 1220 × 3660	69%	12.32
4	25	40 × 40	1007 × 3007 , 1007 × 4007 , 1007 × 4047 , 1007 × 4007 , 1247 × 4047	67%	12.20
5	25	25 × 100	1009 × 3007 ,1209 ×3657 (Bearing bars to run width direction)	67%	13.87
6	30	38 × 38	1220 × 3660 , 997 × 3050	69%	14.60
7	30	40 × 40	1007 × 3007 , 1007 × 4007 , 1007 × 4047 ,1247 × 4047	67%	14.28
8	30	20 × 20 40 × 40	1000 × 4000,1247×4047	42%	18.10
9	38	38 × 38	997 × 3050 , 1220 × 3660 ,1525×4000	68%	19.71
10	38	25 × 152	1226 × 3665 (Bearing bars to run length direction)	56%	22.40
11	38	20 × 20 40 × 40	1007 × 4007,1247×4047	42%	22.50
12	40	40 × 40	1007 × 3007 , 1007 × 4007 , 1007 × 4047 ,1247 × 4047	67%	19.87
13	40	20 × 20 40 × 40	1247 × 4047	42%	23.70
14	50	50.7 × 50.7	1225× 3660	69%	22.17
15	60	38 × 38	1220 × 3660	47%	50.43
16	P38	38 × 38	1230 × 3670	68%	17.5
17	P30	38 × 38	1220 × 3660	69%	14.0

Height	Mesh	Standard Size	Kg/m 2	Open Area	Resin
25.4mm	38.1mm pane	1220mm×3660mm	12.3	68%	V,I, 0,P
30.0mm	38.1mm pane	1220mm×3660mm	15.0	68%	V,I, 0,P
38.1mm	38.1mm pane	1220mm×3660mm	18.8	68%	V,I, 0,P
50.8mm	50.8mm pane	1220mm×3660mm	21.9	71%	V,I, 0,P
Choose: 1. antiskid and concave; 2.Grit on upper surface; 3. the surface close and other size upon request .
Note"V" Vinyl resin I Isophthalic resin O Orthophthalic resin P Phenolic Resin