PU scraper Physical Features:
1 | good abrasion resistance |
2 | wide hardness range |
3 | mechanical intensity |
4 | good oil and water resistance |
5 | good resistance to oxidation and Heat |
6 | low temperature resistance |
7 | shock absorption |
8 | good electrical insulation properties |
9 | good tear resistance |
10 | low compression set |
Performance:
1. PU material has high abrasion resistance, high aging resistance, high anti-solvent,long life span.
2. PU material can protect the belt conveyor effectively. PU conveyor belt scrapers are
used to scrape coal chemical adhesion of ash and powder materials such as coal transportation, fertilizer delivery, and gravel delivery and so on.
3. PU scraper for scraping cloth products, shaving products, such as the adsorption of water.
4. Our squeegee made of special polyurethane elastomer has the following advantages:
*High abrasion resistance and tear resistance to print high quality materials evenly.
*Excellent resistance and minimum swell to a wide range of pastes and solvents
*Precisely finished edge
*Super solvent resistance
*Long service life
5. Normal Squeegees Mainly used in the glazing line of ceramic, wood and other Industries
with lower polar solvents.
6.Anti-Solvent Squeegees is used in PCB manufacturing enterprises and printing industry.
It’s easy to grind, suitable for printing circuit board.
7. NDI products is super wear-resistant, tear-resistant, super solvent and is suitable to
plastic silk screen.
8. Flat squeegees, squeegees with edge
- 9. All types could be produced according to your requirement.
Technology parameters :
WidthB(mm) | 500 | 650 | 800 | 1000 | 1200 |
|
|
|
|
|
| ||||||||||||||||||||||||||||||||
HeightH(mm) | 80 | 120 | 160 | 80 | 120 | 160 | 120 | 160 | 200 | 160 | 200 | 240 | 200 | 240 | 300 |
|
| 300 | 400 |
|
|
|
|
| |||||||||||||||||||
Clapboardheight(mm) | 75 | 110 | 150 | 75 | 110 | 150 | 110 | 150 | 180 | 150 | 180 | 220 | 180 | 220 | 280 |
|
| 280 | 360 |
|
|
|
|
| |||||||||||||||||||
BeltV(m/s) | 0.8 1.0 1.25 1.6 2.0 2.5 3.15 4.0 |
|
|
|
|
| |||||||||||||||||||||||||||||||||||||
Transmissio roller D(mm) | 400,500 | 400,500,630 | 500,630,800 | 630,800,1000 | 630,800,1000,1250 | 800,1000,1250,1400 |
|
|
|
|
| ||||||||||||||||||||||||||||||||
Redirection diameter (mm) | 400 | 400,500 | 400,500,630 | 500,630,800 | 500,630,800,1000 | 630,800,1000,1250 |
|
|
|
|
| ||||||||||||||||||||||||||||||||
Rolle diameter (mm) | 89 | 108 |
|
|
|
|
| ||||||||||||||||||||||||||||||||||||
Nominal dip Angle | 0-300 300 400 450 500 550 600 650 700 750 800 850 900 |
|
|
|
|
| |||||||||||||||||||||||||||||||||||||
Allow dip Angle | 0-900 |
|
|
|
|
| |||||||||||||||||||||||||||||||||||||
