B:19 ~ 36VDC         C:36 ~ 72VDC        

D:72 ~144VDC

Protection type : Shut down o/p voltage,

re-power on to recover

Protection type : Shut down o/p voltage,

re-power on to recover

Shut down o/p voltage,

recovers automatically

after temperature goes down

10 ~ 500Hz, 2G 10min./1cycle,

60min.each along

X, Y, Z axes

IEC60950-1 approved

(for SD-200C-24 type only),

IEC60950-1 CB approved by TUV

(for D type only)

I/P-O/P:1.5KVAC     I/P-FG:2KVAC   

  O/P-FG:0.5KVAC

I/P-O/P, I/P-FG, O/P-FG:100M Ohms /

500VDC / 25°C/

70% RH

Compliance to EN61000-4-2,3,4,6,8 ,

light industry level,

criteria A

1. All parameters NOT specially mentioned are measured at 230VAC input,

rated load and 25°C of ambient temperature.1. All parameters NOT specially

mentioned are measured at 230VAC input, rated load and 25°C of

ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12”

twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into

a final equipment. The final equipment must be re-confirmed that it still meets

EMC directive.