A. Introduction

     This infrared thermometer is used for measuring the temperature of the object's surface, which is applicable for various hot, hazardous of hard-to-reach objects without contact safely and quickly.

     This unit consist of Optics, Temperature sensor signal amplifier, processing circuit and LCD display. The optics collected the infrared energy emitted by object and focus onto the sensor. Then the sensor translates the energy into an electricity signal. This signal will be turned out to be digital shown on the LCD after the signal amplifier and processing circuit.

 

B. Functions:

   1. Celsius / Fahrenheit switchable

   2. Equipped with a laser for aiming

   3. Temperature hold

   4. LCD backlight

   5. 20 seconds auto power off

   6. Light weight and easy operation

 

C. Specification

Temperature Range	-50°C~1350°C(-58°F~2462°F)
Accuracy	*0°C~1350°C(32°F~2462°F): ±1.5°C(±2.7°F) or±1.5%  *-18°C~0°C(0°F~32°F): ±3°C(±5°F)    Whichever is greater
Resolution	0.1°C or 0.1°F
Repeatability	1% of reading or 1 °C
Response time	500 mSec, 95% response
Spectral response	8~14 um
Emissivity	0.1 to 1.00 adjustable
Distance to Spot size	50:1
Operating Temperature	0°C~40°C(32°F~104°F)
Operating Humidity	10~95% RH non-condensing up to 30°C(86°F)
Storage Temperature	-20~60°C(-4°F~140°F)
Power	9V battery
Typical battery life	Non-laser mode: 22 hrs;  Laser mode: 12 hrs
Weight	270g
Dimension	141x60x200mm

 

D. Operating instructions

   

    a. Operating the unit

       

   b. Locating a hot spot

       

  c. Distance to spot size

             When take measurement, pay attention to the Distance to spot size. As the Distance (D) from the target surface increases, the spot size (S) of the area measured by the unit becomes larger.

             *****This unit is equipped with a laser, which is used for aiming.

        

        

      Make sure the target is larger than the unit's spot size. The smaller the target the closer measure distance. When accuracy is critical, make sure the target is at least twice as large as the spot sise.

 

d. About the Emissivity:

           Most organic materials and painted or oxidized surfaces have an emissivity of 0.95 (pre-set in the unit). Inaccurate readings will result from measuring shiny of polished metal surfaces. To compensate, cover the target surface with masking tape or flat black paint. Measure the tape or painted surface when the tape of painted reach the same temperature as the material underneath.

          

   

E. Packing information

   Packing: Gift box + PP box

   Standard Quantity Per Carton: 12pcs

   Standard Carton Sise: 53x50.6x35CM

   Standard Carton Gross Weight: 16.3KG