Specifications

Measurement idler wheel selection:

Hold the MODE key when turning on the meter to enter idler wheel selection mode as shown below. The default selection is the 0.1m idler wheel. At this time, you can select 6", 12" or 0.1m of the wheel by operating the plus or minus key. After selecting, lightly press the MIN / MAX key to enter the normal test mode.

Specification:

• Rotation speed display is five-digit LCD number with maximum of 19999 
   
• Display 0 below 50 RPM 
   
• Measurement mode 0--5 
   
• Display voltage lower than 4.5V when batteries are low 
   
• Dimension: 155mm x 60mm x 27 
   
• Power supply: 4 × 1.5V SIZEAAA battery 
   
• Auto off time is 30 sec 
   
• Operate environment: 
   
• Elevation <2000 m
   
• Relative humidity (RH) <=80%RH
   
• Operating temperature: 0 - 40C

• 1 x MS6208A bare machine
• 1 x Operation Manual
• 2 x Measurement idler wheels
• 2 x Measurement touch tips
• 1 x Lengthening bar