Product Details

Materials of Construction	Filter membrane	PP membrane
	Diversion layer	pp non-woven
	External support cage	pp material
	Internal support	pp material or pp stainless liner
Specification	OD	Φ68mm Φ69mm
	ID	Φ32mm
	length	2.5~40"
Seal ring	Silicone,EPDM ,Nitrile ,Fluorous ,Fluorous and PTFE
Precision	0.10,0.20,0.45,1.00,3.00,5.00,10.0,20.0,40.0 ,50.0µm
Effective filtering	Dimension≥0.60m²
Operation condition	PH value	1~14
	Normal working temperature	≤55℃
	Max. working temperature	80℃, pressure differential ≤0.10Mpa
	Max. differential pressure	25℃,forward direction 0.42Mpa,reverse direction 0.21MPa
Educt	Esotoxin	<0.25EU/ml
Educt	Extractive	<0.03g/10"filter cartridge

Integrity Test

TEDA membrane:(Min. bubble point 25℃,95%IPA or ethanol)

Bore diameter(μm)	0.10	0.20	0.45	1.00
Minimum bubble point( MPa)	≥0.012	≥0.010	≥0.008	≥0.002

Imported membrane:(Min. bubble point 25℃,95% IPA or ethanol)

Bore diameter(μm)	0.10	0.20	0.45	1.00
Minimum bubble point (MPa)	≥0.015	≥0.011	≥0.009	≥0.003

Imported hydrophilic membrane:(min. bubble point 25℃,95% IPA or ethanol)

Bore diameter(μm)	0.10	0.20	0.45
Min. bubble point MPa	≥0.016	≥0.012	≥0.009

Characteristics

Low differential pressure.

Low-cost.

High flow rates.

Long service life.

Ultrasonic welding and without adhesive.

100% integrity test for filter cartridge.

Widely filter precision and selectivity, available for various situations.

Broad chemical compatibility, and good chemical stability, acid-proof, alkali-proof, ethanol-proof, ketone-proof, DMF-proof, phenol-proof and other chemicals.

Typical Applications

Unclear power plant and heat-engine plant and natural gas plant process water filtration and gas filtration. Filter the waste water treatment chemicals and Emulsion waste water filtration.Front protection of UF membrane and RO membrane to impede floccules and jelly, impeding ion exchange resin, pre-filtration of liquid membrane purification.

End Cap Configuration

-226 O-ring -222 O-ring Flat Gasket Alignment Fin