Name: Henan Better simple dry mortar production machinery
Brand: Henan Better
Availability: InStock

Product Details

Better's Product

Dry mortar production machinery is our company customed for our clients.

Have convenient flow operation system, and efficient, reasonable, easy control.

The product line have a mixing machine, packing machine, finished product silo, control cabinet, air compressor system and other auxiliary equipment.

1.Smooth operation,2-3 people can make it

2.Convenient transport, little machine compose.

3.Simple maintenance.

4.High output and low noise, the output can reach 10-20t/day.

5.Small footprint,the height less than 3m, ordinary houses can build the factories.

6.Small investment, best for individuals.

7.after mixing evenly, through a feeding tube into the material storage bin, dry powder mixing machine can be continuous feeding, continue to stir, thus improves the production efficiency.

Dry mortar (also known as dry mortar) is a kind of advanced production equipment - computer-controlled automatic dry mortar production line through the sand pretreatment (including drying, sieving), dosing, mixing, packaging or bulk storage factory production of "dry mix" type of ready-mixed mortar. Since the production process strictly weighing ratio, and depending on the functional requirements of the corresponding mortar chemical additives added, greatly improves the quality of the mortar.

Dry mortar applications to avoid the artificial quality defects site preparation, to ensure the construction quality, while reducing urban waste and environmental pollution, improve the level of civilization construction, and has broad market prospect is a green building with new materials .

Henan Better simple dry mortar production line parameter

JYGF Production line	Output	Occupied area	Equipment height	Remark of batching and packing
Simple	1-15t/h	40m2	5-10m	Manual batching and packing
Basic	5-15t/h	40-60m2	6-10m	Manual batching, automatic packing
Semiautomatic of serial mode	5-15t/h	40-80m2	8-12m	Automatic batching of coarse material, manual batching of additive, automatic packing
Semiautomatic of tower mode	5-50t/h	40-100m2	10-25m	the same to serial semiautomatic mode
Fully automatic of tower mode	5-50t/h	60-500m2	10-25m	Automatic batching of all raw material and packing

Sealed storage system

1) sealed silo
Silo device configuration can be set according to the same specifications or more different sizes, usually by silo welded steel.
Feeding into the silo, you can use the pipe pneumatic conveying or bucket elevator conveyor, screw conveyor can also be used. From the silo feed conveyor to the mixer commonly used pneumatic conveying pipe and screw conveyor transport.
In order to prevent the material inside the silo, arch plug silo usually has different forms of broken arch device to ensure continuous feed; in order to detect within a variety of settings in the warehouse material level indicator ; In order to eliminate dust pollution, use of warehouse roof precipitator for dust removal.
2) flotation-type discharge system
Nesting material type flotation system installed by a uniform floating silo cone at the bottom of the sheet constituted by compressed air so that the floating of the sheet material layer is formed on the surface of the suspension, the free falling in gravity flow smoothly, this effective warehouse nesting methods suitable for almost all the fine powder materials.
3) discharge screw conveyor system
Spiral discharging system is controlled by rotating helical screw conveyor blades, stop, to control cement (fly ash) material. Screw conveyor is characterized by a large transmission angle, and strong delivery capabilities, dust-proof, moisture-proof performance. To increase transmission capacity, the use of variable vanes in the form of a screw conveyor, filling amount in the feed section, the pitch becomes larger as the filling amount is reduced, which can effectively prevent backflow of high fluidity at the time of transporting the powder material.

ANY QUESTIONS,BETTER CALL BETTER!!!

HENAN BETTER

Henan Better Heavy Industry Co.,Ltd engaged in construction machinery for more than 10 years. The company has more than 200 employees, consist of the 40 years’ experience superior engineering as core of leadership and focus on R&D, production’s team work.Our products sell well all over the country and exported to the Outer Mongolia, Russian, Philippine,Macedonia,Tanzania, Cyprus etc and won overseas customer’s trust and good reputation.

Better Services

1.Pre-sale service:

We will give you suggestive productive technical processing in the prophase plan and manufacturer equipment based on your special demand.

2.Sale service:

If needed, our advanced technicians will be sent your jobsite to guild operation and installation. finish your job together.

3.After-sale service:

In order to keep our cooperating relationship on, we will send technicians to visit to you, making sure the products works normally.

4.We provide one-year warranty to make products works normally. we also offer lifelong service and wearable parts for you.(In addition to artificial damage)

FAQ