Product Details

motor engine truck mounted malaysia concrete pump

Technology:

use S-valve to switch the direction, for fine stone concrete conveying
good sealing S-valve, installed with floating wear resistant ring
High-quality wear resistant alloy components for long service-life
high delivery pressure for demand of high-rise and long distance projects
double-loop open circuit hydraulic system, ensure fast direction switching speed and high efficiency
air cooling system, without dependence of external water supply
with re-pumping function to smooth construction of better accessibility
automatic lubrication system for long service-life
PLC system to ensure best electrical control performance
equipped with wired remote controller, easy to operate

specification:

Items			Units	Parameters
Items			Units	HBTS60-13-90
Whole performance of machine		Max. theo. concrete output (L./H.)	m³/h	82/48
		ncrete pumping pressure (H. /L.)	MPa	13/7
		Distribution valve type		S Valve
		Concrete cylinder diameter×stroke	mm	200×1650
		Hopper capacity×feeding height	L×mm	800×1400
		Outlet diameter	mm	180
Power system		Electrical engineering model		Y280M-4
		Electrical engineering power	kW	90
		Rotate speed	r/min	1480
Hydraulic system		Circuit type		Open circuit
		Pumping system pressure	MPa	32
		Mixing system pressure	MPa	6-8
		Capacity of oil tank	L	560
	The biggest transportation is away from vertically (/Level)		m	200/800
Other parameters		Max. aggregate diameter	mm	Slick scree: 50, Scree: 40
		Inside diameter of delivering pipe	mm	125
		Dimensions:length×width×height	mm	5900×2000×2260
		Total weight	kg	6300

Main technical feature

Ø Double open hydraulic loops (pumping hydraulic circuit is independent of distributing hydraulic circuit) with two pumps, makes the whole hydraulic system much simpler. The reliability of the whole system is also much higher as well as the components’ life is prolonged greatly. This is convenient for judgeing and removing trouble.
- Ø Large valve changing direction, makes the main pumping loop quick response, small leakage, good stability,high reliability and high resist contaminative capability.
- Ø Hydraulic system has safe relief protection,at the same time,when the system pressure is over, the main oil pump cutting device makes itself be protected reliably.
- Ø Distributing hydraulic circuit adopts constant pressure pump, which can provide strong distributing pressure and economic energy control.
- Ø Cone sealing of all pipes make the pipe joints seal reliably.
- Ø The high-low pressure switch adopting cartridge valve of reduces the trouble of dismantling and installing the oil pipe.
- Ø Adopt emulsification technology of initiative and passivity recovery integration.

Warrantee

The warranty will be one year from the date of shipment. Any detected parts during this period caused by the quality of products will be replaced by seller free of cost (exclude wear and tear parts), improper operation and other manmade reasons are excluded.

Payment terms

40% by T/T as advance payment with 7days after the contract signed, the balance of 60% paid after buyer’s products inspection in seller’s factory or seller send the finished pictures to buyer and 5 days before shipment.

Delivery Schedule

Delivery should be within 20 days from the date of receipt of 40% down payment.