Specifications

1. with LCD display
2. gsm wireless network alarm
3. voice instruction
4. ready to alarm function
5. bypass function

New home security alarm system with battery

Technical Parameter

1. The Dimension of the Plastic Shell: 34*25*7.3CM
2. Power Adaptor: AC To DV conventor. Input: AC 220( AC 110V/240V is optional), output:9VDC500mA.
3. Standby Current: ≤40mA Alarm State Current: ≤350mA
4. Working Condition: Indoor, temperature: -10 ~ 50Degree,
Relative humidity: ≤90% atmospheric pressure: 86 ~106Kpa
5. Alarm Receiving Mode: AM AM Receiving Distance:≥120M (In the open area)
6. Voice Instruction: The panel has voice instruction all the way when the user are remote control the
system on phone. When alarm, the panel will alert which sensor, including Door Contacts, PIR
Motion Sensors, Smoke Detector, Gas Detector and Panic Button, was triggered through voice
instruction . And when you operate the system on the panel, there are voice instruction for some
important operation.
7. Preset Phone Numbers: 6 Group (Maximum 30 digits for each group)
8. SMS Number: 1 Group
9. External Siren: ≥110dB; Built-in Siren:≥85dB
10. Frequency:315MHz/433MHz.
11. Protocol for CMS:GPRS
12. GSM Band: Triple-band 900/1800/1900 Mhz, Quad band 850/900/1800/1900 Mhz

 

 

Feature

1. Defence zone LCD Display.
2. Anti-tampering function.
3.Learning code.
4.Compatible with wired and wireless sensors: The panel has 99 wireless zones, 2 wired zones and 2 connection port for Security company warning Board.
5. Spot Alarm.
6.Look up logs/query records.
7. Low-power alert Function.
8. Voice Instruction.
9.Remote control.
10.Back-up lithium battery.
11.Our terminals communicate with CMS by GPRS, with these two parts, owner can provide service to community.
12. Ready to arm function.
14.Door Chime Function.
15.GSM Network Alarm System.
16.we use high-quality,professional,industrial GSM module to design and make our products.
17.Listen-in Function.
19. With wired siren connection port, can set sound/mute Alarm
20.When alarm, the system will automatically send message to central monitoring station and dial the the preset phone numbers. Once the alarm phone has been connected, the user can remotely arm/disarm the system on phone.
21.Intelligent control system to check that whether the user has handled and confirmed the alarm. After confirmed, the system will not dial the pone numbers.
22.DC/AC power auto switch.
23.Compatible with SSG Wireless Doorway Keypad.
24.With USB Interface for Update
25.Can use with flash siren.
26.The LCD use the global hieroglyph which can be recognise by people form different countries.
27.Can use with the electronic board to indicate the arm/disarm/alarm state to deterrent the intruder
28.Time Arm/Disarm automatically.
29.Can use with SSG Central Monitoring Station

 

 

 

Application

 

 

 

 

 

 

 

 

Our Company & Factory