UPS Dry Contact Card ! UPS Dry Contact Signal Monitoring Control Card
Negotiable /Piece
Min.Order:1 Piece
Guangzhou Richcomm System Technologies Co., Ltd.
UPS Dry Contact Card & AS400 Card & SNMP Card for Uninterruptible Power Supply
UPS Control Card for Line Interactive UPS & Industrial UPS & Server Room/Data Center UPS
UPS SNMP Card for Single Phase Line Interactive Uninterrupted Power Supply
Three phase Online Pure Sine Wave UPS Motoring: Netmate II mini
Single Phase Computer industrial UPS Monitoring SNMP Card -NetmateLite
Dry Contact Card
1. Introduction
Dry Contact card has 3 LED indicator lamps to check its working status, communication status and UPS working status; it through RS232 port(DB9-type) to contact with UPS to monitor UPS failure, UPS alarm, bypass, battery voltage low, AC fail, UPS on etc.
2.Feature
l Independent embedded system, no need to rely on other computer;
l Real-time monitor UPS operation status, support remote control UPS shutdown;
l Support remote control UPS power output, help to reboot crash device;
l The output is dry contact signal, convenient for installation and use;
l Plug and play, no need to do other settings;
l Good compatibility, the output dry contact signal can be easily link with other device;
l Unique LED design, user can check various UPS operation status by the LED flash frequency;
l Support Santak AS400 card;
l Support normally on/off, convenient for customers to use;
l System isolate with external electricity. Protect the system run reliably.
3. Pruduct Picture
4. Function
l Support remote monitor for UPS operation status(output dry contact signal through voice light alarm sensor etc);
l Can remote control UPS shutdown;
l UPS alarm status can be check by AS400 card indicator lamp.
5. Dimension
Dry Contact (Internal)