Double layer structure weighing scale for auto cars
Negotiable /Piece
Min.Order:1 Piece
Shanghai Zhaohui Pressure Apparatus Co., Ltd.
Double layer structure weighing scale for auto cars
Description
Double-layer structure is used in ZH108A3. The top layer is made of stainless steel, and the bottom layer is made of aluminum alloy. Four parallel-beam sensors are used to strengthen the ability to with stand overload; Compared with other products of the same type, the calibration of ZH180A3 can be more easily fulfilled.
ZH-180A3 can be used for auto car manufacturer to check the auto car weight.
Parameters
Rated load: 0.5t/1t/2t/5t
Rated output: 1.0±0.1mv/v
Non-linearity: 0.1%FS
Repeatability: 0.05%FS
Error on transverse: 0.1%FS
Zero balance: 0~3%FS
Static comprehensive error: 0.1%FS
Use temp.range: -30~80°C
Compensated temp.range: -10~50°C
Temp.effect on span: 0.03%FS/10°C
Temp.effect on zero: 0.05%FS/10°C
Output resistance: 87±3Ω
Defend grade : IP 67
Ultimage overload: 150%FS
Recommended voltage: 10V
Excitation voltage: 9~15V
Net weight: 60kg
Max load of 1 /4 weigh bridge:
0.3t/0.6t/1t/1.5t/2.5t
Full load: 0.5t/1t/2t/3t/5t
Dimension of the surface:
1100×700mm
Remark: Four-core shielded
cable is attached: φ5.5×10m
(The cable length can be changed according to customer's request)
Factory show