Description

PD9001 is PID pressure controller for PLC system . this PID intelligent pressure controller integrate a number of international advanced electronic & Single-chip computer technology ,meanwhile with high cost performance and adaptability of the fluctuate conditions of power grid can completely replace the same imported high-grade pressure controllers or controllers overseas. the beautiful shape , complete functions & excellent anti-interference performance to ensure the stability and reliability of the system.

.

Specification

Digital Display : Double layer double color four digital display ( green and red )

Electronic bar display: 20 segments electronical bar indicate the output power

The range of display : 0000~9999 (radix point alterable)

Accuracy: 0.2%FS±1

the display of indicator light : AL-1,AL-2,CAE, MAN

Pressure range : programmable setting

Sampling frequency : 50times/s

Alarm output : two circuits with programmable alarm Settings

Input : 2mV/V,3.3mV/V,0~10mA,0~20mA,4~20mA,0~5V,1~5V,0~10V ( order need stated )

PID output : 0~5V,0~10V,4~20mA ( order need stated )

work environment : 0~55℃ & ≤80%RH

Working power supply : 85~265VAC,50~60Hz;

Controller size : 96×96mm , Hole size : 92×92mm

Picture

Demension

Pressure controller panel & buttons instruction

1.  PV display windows

a) set status: parameter code display settings

b) measuring status: display real-time pressure value

2. SV display window:

a) set status: display setting value

b)measuring status: display controller pressure value

3. MPa: pressure unit

4. 0-100% : output power display bar

5. AL-1: first alarm indicator

6. AL-2 : second alarm indicator

7. CAE: calibration indicator

8. MAN: manual operation indicator

9. MODE: mode key (empty) , Complete

10. withdrawal from the main Menu

11. A/M: Auto/Manual switch operation key

12. AC: reset key

13. CAE: calibration key

14. SET: Function key : the pressure value would be zero clearing , if you press thefunction key and AC reset key at the same time .

15. < : Shift key : if you mistake the zero clearing operation , now you need to press function key and the shift key for 5 seconds to restore the calibration value .

16. ∨: Moving down key

17. ∧: moving up key

Pressure controller indicator lights Instruction

1. The first alarm indicator light AL-1, when it alarms , the indicator light is ok , when it doesn’t , the indicator light is off .

2. The second alarm indicator light AL-2, when it alarms , the indicator light is ok , when it doesn’t , the indicator light is off .

3. The calibration indicator light CAE , when the instrument do the automatic calibration operation , the indicator light starts flickering , otherwise it will off .

4. The manual status indicator light MAN ,when the manual status selected , the light is on , when the automatic state selected , it will be off .

Order Guide: with "* "are required , with "---"is optional  

This PID digital pressure controller can matching whether our melt pressure transmitter PT124B-12X or PT124B-11X to measure and controller your equipment .