antistatic rubber mat

antistatic rubber mat

ESD rubber mat

mat in cleanroom

ESD dissipative mats are designed to harmlessly drain charges from presonnel, esd boxes, 
components and etc. It is lie flat-will not cart and not affected by humidity and superior 
resistance to abrasion, chemicals and heat resistant, easy to clean and maintain. 
ESD rubber mat or conductive ground mats should be laid out in the workshops and advanced 
laboratories for microelectronic industries such as electronic semi-conduct devices, electronic 
computers, electronic communication equipment and integrated circuits and etc, to eliminate 
damages caused by static electricity. When ESD rubber mat (ground mats) are laid out and 
grounded, the working surface will discharge the static electricity of human bodies so that a 
near-equipotential can be maintained for ESD tweezers, tools, utensils and instruments, 
through which human bodies contact the working table and static sensitive devices(SSD) are 
free from broadband interference produced by static discharging such as triboelectrification 
etc. In this way, electrostatic protection is realized. ESD rubber mat are mainly made of antistatic( 
conductive) and static-dissipative materials, and synthetic rubber. The surface layer is a 
0.5mm thick static-dissipative layer. The bottom layer is a 1.5mm conductive layer. Usually 
2mm thick double-layer structure is used. 
Our antistatic table mat/ floor mat does not contain sulphur, which easily reacts with 
other substances to cause decoloring of the products and bring harm to huaman body.

ES14101 ESD mat 
1.5mm conductive layer/0.5mm esd disspative layer 
Antistatic mat is mainly made with anti-static/ 
conductive material and dissipating material of 
synthetic rubber. Often a 2mm 
thickness of a double-layer composite 
structure, the surface layer is about 0.5mm 
thick static dissipative layer, the bottom of 
the conductive layer is approximately 
1.5mm thickness. 
Customized size is available.

ES14103 ESD floor mat 
Anti-shake, anti-fatigue 
Inside net structure, resistance in average 
Surface resistance: 10^7-10^9Ohm 
Bottom resistance: 10^3-10^ 
Volume resistance: 10^5-10^8Ω 
static decay in short time, life more than 2 years 
Shape of surface: square, rhomb

ES14102 ESD anti-fatigue floor mat 
Material: Top layers: PVC; middle Layer: EPDM foamed; 
bottom layers: NBR/PVC 
Using advanced production technology, the surface resistance 
is 10^3-10^5Ω, permanently prevent static electricity 
Composite layer structure of an effective cushion foot 
pressure, alleviate fatigue 
The surface with yellow warning side, naturally form anti-static 
protected areas 
Clean and convenient, easy-to-move does not affect the 
normal working environment 
Non-slip surface, acid and alkali resistant, safe to use 
Two 10mm buttons in the mat, grounding cord is available to 
connect 
Standard size: 0.45mx0.6mx15mm/17mm 
0.6mx0.9mx15mm/17mm (2layers/3layers) 
Standard width: 0.6m, 0.9m, 1.2m. The max width is 1.2m, and 
the max length is 20m 
Standard thickness: 15mm, 17mm 
Color: black, yellow and black

Shenzhen Eles Technology Co., Ltd 

Susan Lee  sales representative

Address: F/513,Tower D, Hongtaifu Bldg. No. 514, Jianan 1st Rd., Block 34, Baoan,

Shenzhen, 518133, Gunagdong, China

T: 13824326080 F: 0086-755-29075496

Skype: elestech-sales3

Whatsapp: +86 13824326080